toshiba info

[compuman]

hi to every one
could someone please tell me how shall i connect the usb terminal on a sata toshiba because i am gettins some errors! or if there are some updates which i have to install them?

[dmarques]

Why do you need to connect the usb terminal to Toshiba drive?

[Alberto]

toshiba doesnt has terminal log from startup like Seagate until im know

[steven]

there is a terminal access for Toshiba. But it is not so important

[tec]

Please supply terminal connection layout for Toshba SATA drives.

[ddr]

I also require the toshiba SATA terminal connection layout. You do need to connect terminal to allow capture of the CP modules?

Thanks
Joel

[ddr]

Found a diagram on another forum.. Worked well..

[tec]

Thank you

[gterry]

Is the ground pin required? On the deepspar forum they only show the txd/rxd connected.

[AJ2008]

You need only TX and RX attached to the middle jumper pins.

At terminal window hit "Enter" you should see a ">" sign if terminal is correctly attached.

IF not, switch positions of TX + RX connections.

[gterry]

Thanks!!