m2 SK hynix

Moderators: Roman_TS, Filipp_TS, Sergey_TS

Post Reply

Southman343
Newbie
Posts: 2
Joined: 21.11.23
Reputation: 0 / (0)

m2 SK hynix

Postby Southman343 » 28.11.23, 10:46

Hi Friends

SK hynix (HFM256GDJTNG) BC501 with HFB1M8M0331A controller. I can't find contacts to transfer to safe mode. If someone has encountered this ssd, please help.


Thanks
Attachments
2Scan.jpg
2Scan.jpg (5.1 KiB) Viewed 15976 times
1Scan.jpg
1Scan.jpg (6.27 KiB) Viewed 15976 times
Top
User avatar
Roman_TS
Site Admin
Posts: 761
Joined: 09.02.11
Reputation: 28 / (278)

Re: m2 SK hynix

Postby Roman_TS » 28.11.23, 13:32

Hello,

SAFE MODE will block access to NAND chips array, so you would be able work with the drive RAM + CPU. Not sure how exactly it should help :)
With best regards
ACELab Technical Support
ts.acelab.eu.com
blog.acelab.eu.com
Top

Southman343
Newbie
Posts: 2
Joined: 21.11.23
Reputation: 0 / (0)

Re: m2 SK hynix

Postby Southman343 » 29.11.23, 05:25

The problem is that the loader does not load due to an error in transferring the drive to safe mode, but thanks for the advice
Top
User avatar
Roman_TS
Site Admin
Posts: 761
Joined: 09.02.11
Reputation: 28 / (278)

Re: m2 SK hynix

Postby Roman_TS » 29.11.23, 08:13

But there is no Sk Hynix Utility in PC-3000 SSD, and no available loaders for this type of CPU.

It's a BGA-SSD drive, where controller, RAM and NAND chips are integrated into a common silicon layer.
With best regards
ACELab Technical Support
ts.acelab.eu.com
blog.acelab.eu.com
Top
Post Reply

Return to “Other SSD”

Who is online

Users browsing this forum: No registered users and 6 guests