Short points for ST4000DX000

Moderator: Nick_TS


nosaj
Newbie
Posts: 6
Joined: 23.10.12
Reputation: 0 / (1)

Short points for ST4000DX000

Postby nosaj » 21.12.20, 01:46

Would greatly appreciate short points on PCB 100706008 as per attached. Drive patched, but cannot gain access to terminal to unlock via patch

bottom.jpg
bottom.jpg (1.2 MiB) Viewed 1723 times

top.jpg
top.jpg (1.04 MiB) Viewed 1723 times


northwind
New user
Posts: 147
Joined: 14.06.11
Reputation: 5 / (47)

Re: Short points for ST4000DX000

Postby northwind » 21.12.20, 09:22

Even though I'm not sure I understand what you mean by "cannot gain access to terminal to unlock via patch", here:
sp.png
sp.png (933.48 KiB) Viewed 1715 times


nosaj
Newbie
Posts: 6
Joined: 23.10.12
Reputation: 0 / (1)

Re: Short points for ST4000DX000

Postby nosaj » 21.12.20, 14:49

modified patch rom was applied now when drive cycles can not get gain access to terminal. those red point where the ones i was using, but guess my timing is off. Any help with timing

here is output at startup and just repeat v00000008q


Boot 0x80M
Spin Up
RECOV Servo Op=0100 Resp=0005
Trans.

(P) SATA Reset

Last Saved GlobalHeader EraseInProgress:02 DiscDataValid:00
ISP: 43A17830 00001FE8 E441 0000
TW: 1EF7D947 00000FF8 594C 0000[000000000052A857]v00000008qv00000008qv00000008qv00000008qv00000008qv00000008qv00000008qv00000008qv00000008qv00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV
00000008qV00000008qV00000008qV00000008qV00000


Return to “Arch F3”

Who is online

Users browsing this forum: No registered users and 7 guests