What family is the WD5000LPCX-22VHAT0?

[osity]

1. Is it not possible to auto detect the family when using the PC3K over USB?
2. What family is the WD5000LPCX-22VHAT0?
3. Can the resources be backup up through USB connection?

[pclab]

To know the family, check module C5.
You can read modules by USB if the drive is healthy or use terminal cable connected to the PCB.

[osity]

Yes I'm dealing with healthy drives. What utility are you suggesting I used to read the modules? I do not intend to open the enclosure as it is completely rubberized. (So no terminal access)

[pclab]

You just plug it to USB and choose WD USB on PC3K utility.
It will work as sata WD.

[osity]

To open the utility you need to choose a family....

[pclab]

Choose any family.
That you can read the C5 module and see the family.

[osity]

oh... ok thanks for the tip Pclab!

[pclab]

Did it worked?

[osity]

I have not tried it yet, but when i do I will post back. It may be a few days.

[Maxim_TS]

osity, most possibly it is HUBLT2, it is not presented in PC-3000 for now. You can work with it using Hubble LT family.

[Amarbir[CDR-Labs]]

Source of the post osity, most possibly it is HUBLT2, it is not presented in PC-3000 for now. You can work with it using Hubble LT family.

Maxim,
Many New Families Are To Be Added In WDC I Have Come Across Many

[Maxim_TS]

Amarbir[CDR-Labs], I agree, WD added a lot of new families recently, and ACE developers are working on it already.