ST2000DL003 FIRMWARE PROBLEM

[OHMYDATA]

Hello,
i have a ST2000DL003 with FW CC31 firmware failed like a Baracuda 11.
Not detect in bios but normal sound.
I tried to fix with hyper terminal but fail.
Please help.

[dmarques]

Never seen that drive.
Is that the model? And what's the family?
Can you post a picture of the label?

[OHMYDATA]

Please refer attached picture.

st2000dl003.jpg (60.41 KiB) Viewed 9899 times

[dmarques]

Now I see it. LP series.

Can you shows terminal log?

[einstein9]

what is the problem with this drive?

and when it powers up, does the sound looks OK or clicks?

again some terminal log of the Init. from termianl

[OHMYDATA]

Capacity 0 MB problem.
After power on, sounds ok.

[OHMYDATA]

Shows terminal log:


Rst 0x40M
RW: Disc Ctlr Initialization Completed.
MC Internal LPC Process
(P) SATA Reset

User Data Base 009907F0

MCMainPOR: Start:
Check MCMT Version: Current
MCMainPOR: Non-Init Case
MC Seg Disc and Cache Nodes: 4011985C 4011796C
Seg Write Preamble VBM start: 000010A7 end: 000010CE
Footer - start: 000010D0 end: 000010F7
Seg Read Preamble VBM - start: 000010F9 end: 00001120
Footer - start: 00001122 end: 00001149
Reconstruction: MCMT Reconstruction Start
Max number of MC segments 22E0
Nonvolatile MCMT sequence number 00006299
[RSRS] 1D74
Reconstruction: EXCEPTION: Segment Overall Sequence Number Mismatch

00003219 00000000
[MCMTWS]
Reconstruction Fail: Burly Case
MCMainPOR: MCTBufferPtr->Header.MCStateFlagsDisc = 00001001
MCMainPOR: MCTBufferPtr->Header.MCTStateFlags = 0000002A
MCMainPOR: MCStateFlags = 00001001

MCMainPOR: Feature Disabled...
No HOST FIS-ReadyStatusFlags 0002A1E1
ASCII Diag mode

[OHMYDATA]

Shows terminal log:


Rst 0x40M
RW: Disc Ctlr Initialization Completed.
MC Internal LPC Process
(P) SATA Reset

User Data Base 009907F0

MCMainPOR: Start:
Check MCMT Version: Current
MCMainPOR: Non-Init Case
MC Seg Disc and Cache Nodes: 4011985C 4011796C
Seg Write Preamble VBM start: 000010A7 end: 000010CE
Footer - start: 000010D0 end: 000010F7
Seg Read Preamble VBM - start: 000010F9 end: 00001120
Footer - start: 00001122 end: 00001149
Reconstruction: MCMT Reconstruction Start
Max number of MC segments 22E0
Nonvolatile MCMT sequence number 00006299
[RSRS] 1D74
Reconstruction: EXCEPTION: Segment Overall Sequence Number Mismatch

00003219 00000000
[MCMTWS]
Reconstruction Fail: Burly Case
MCMainPOR: MCTBufferPtr->Header.MCStateFlagsDisc = 00001001
MCMainPOR: MCTBufferPtr->Header.MCTStateFlags = 0000002A
MCMainPOR: MCStateFlags = 00001001

MCMainPOR: Feature Disabled...
No HOST FIS-ReadyStatusFlags 0002A1E1
ASCII Diag mode

[dmarques]

What fixes did you apply already and what was the results?

[OHMYDATA]

Clear smart
T>/1
1>N1

Clear defect list & translator regenerate.
T>i4,1,22
T>m0,6,2,,,,,22

But keeps bsy.

[einstein9]

when you power it ON, just listen carefully and listen
does it spin normal? on the begin. ???

[OHMYDATA]

Yes, it spins normal.

[einstein9]

both clearing smart & translator reg. were ok or with problems?

[OHMYDATA]

It works with no error.