M15 Family

[zeroalpha]

Anyone have any success with M15 Family? Ace still working on a solution.

Model : ST5000LM000-2U8170
Serial : WCJ5LR19
Firmware : 0001
Capacity : 5 TB (9 767 541 168)


Boot0x80M
SpinUp
TCC:001D

Trans
Rst0x80M
T:0x0001 0x0DDF8086
FTU
TCC:001D EMCDataErr:0000000E

PrgF
(P)SATAReset

RAWOFF
PASS
Secondaryislatest!-00000001
Primaryisobsolete
[MCMTW_DSW]Primary-000ABC85LPCDisc=01447AC94E00C5
PrgF
6GbMaxSpeedloweredto3GbforIntelbug
SendStatus:COMRESETseen
CSpd=3Gbps
FIS34
[BRO-0002]00447AB378-00447AC94DExtents-0001Blk-00000000D-00000001
FAILServoOp=06DFResp=0007
06DF0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ResponseFrame00000216FFFFFFF000080000000000000EB60000000000000600000019AA002E00000000000000000000000000000000000000000000000000000000000000000029Loop=2247
DSC FAIL
ServoDiscSlipFailedErrCode=0415018B
FAILServoOp=000EResp=000B
000E0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ResponseFrame26720011FFFFFFF000080000000000000EB60000000000000600000019AA002E00000000000000000000000000000000000000000000000000000000000000002247
FAILServoOp=0995Resp=0007
0995A26900057FFF7FFF7FFF000000000000000003E80000FFFF8DC000000081004C00000000000000008C603F8CA00000000000000000000000000027000000
ResponseFrame26720011FFFFFFF000080000000000000EB60000000000000600000019AA002E00000000000000000000000000000000000000000000000000000000000000002247Loop=2247
FAILServoOp=0995Resp=0007
0995A26900057FFF7FFF7FFF000000000000000080000000FFFF8DC000000081004C00000000000000008C603F8CA00000000000000000000000000027000000
ResponseFrame001400100004C62C2001BD70E92D41F0F6FFFB5B000000004D00000019AA084A0000000000000000000000000000000000000000000000000000000000000000FFFFLoop=2247

[Doomer]

Anyone have any success with M15 Family?

Yes

[zeroalpha]

Source of the post

Anyone have any success with M15 Family?

Yes

You can unlock tech mode?

[Doomer]

Source of the post

You can unlock tech mode?

Yes, I can

[zeroalpha]

Source of the post

Source of the post

You can unlock tech mode?

Yes, I can

are you making useless posts or are willing to prove it?

[Doomer]

Source of the post

are you making useless posts or are willing to prove it?

I accept cases if you want to outsource.

The proof

Code: Select all

M15.JanusR2.SBP3.SATA.Servo376.Rap30RevA.4K + SMR Despo DFW BP3
Product FamilyId: CF, MemberId: 01
HDA SN: WCJ5xxxx, RPM: 5527, Wedges: 178, Heads: A, OrigHeads: A, ActiveHdMap: 03FF, Lbas: 0000496B6B5D, PreampType: 82 50
Bits/Symbol: C, Symbols/UserSector: 0, Symbols/SystemSector: 0
PCBA SN: 0000C1527WEM, Controller: JANUS_R1_SATA(2310), Channel: Unknown, PowerAsic: KONA Rev A042, BufferBytes: 8000000
SF ID: EF 60, SF Part Size: 800, Flash Used: 800
Package Version: M2AEA13B0.SDM4.410012.0001    , Package P/N: 200456700, Package Global ID: 00305567,
Package Build Date: 12/15/2020, Package Build Time: 20:01:33, Package CFW Version: M2AEA13B0.SDM4.410012.02093578.00305567.0001    ,
Package SFW1 Version: B0BE, Package SFW2 Version: ----, Package SFW3 Version: ----, Package SFW4 Version: ----
Controller FW Rev: 12152001, CustomerRel: 0001, Changelist: 02093578, ProdType: M2AEA13.SDM4, Date: 12/15/2020, Time: 200133, UserId: 00305567
Servo FW Rev: B0BE
TCG IV Version: 40.02
Package BPN: 7
RAP FW Implementation Key: 1E, Format Rev: 000A, Contents Rev: 11 19 01 00
Active BFW Container: 0
4K Sys Area: 1
Features:
- IOEDC enabled
- IOECC enabled
- DERP  enabled v. 7.0.00.0000000000000000
- LTTC-UDR2 compiled off
- SuperParity 4.1 enabled OTF OC enabled
   TotalSuperBlks     TotalValidSuperBlks
   003C865D           003C8659
- Humidity Sensor disabled
- Media Cache Partition enabled
- Media Cache enabled
- Low Current Spin Up enabled
- Torn Write Protection enabled
- SubRelease:0
- Critical Event Log v. 1
- FAFH 70.0 disabled
- EWP:0
- DRAM Mirror:0
- FwSRN:0004 SfwSRN:0004 CID:01

[Doomer]

Source of the post
Anyone have any success with M15 Family?

So, your client needs data and you lack the tools. Outsourcing will be a smart move here.

[HX-20]

Source of the post
Anyone have any success with M15 Family?

So, your client needs data and you lack the tools. Outsourcing will be a smart move here.

Or you could just share the love, Mr Doomer?

[Doomer]

Source of the post
Or you could just share the love, Mr Doomer?

I would like to get paid for all the work I've done.
If you think it's not worth it then you can do the research yourself.

[HX-20]

Source of the post
Or you could just share the love, Mr Doomer?

I would like to get paid for all the work I've done.
If you think it's not worth it then you can do the research yourself.

Are you selling or will you only support outsourced cases?

[Doomer]

Source of the post
Are you selling or will you only support outsourced cases?

Outsource only

[Maxim_TS]

Dear Customers, please note that all manipulations made not by ACELab engineers and PC-3000 equipment you are doing on your own risk.

ACELab developers are working on such a solution for M15 family, we hope to provide a solution in the near future.