2.5" ST320LT009 320GB SED, no ID, Seg Read Errors

[osity]

ST320LT009
Part# 9WC142-031

Drive spins up fine stays spinning and comes ready but wont auto detect family, no ID.
It seems to be Julius1.

In the terminal output I get the following that just keeps repeating:

Rst 0x10M
(P) SATA Reset

Seg Read Error at LBA= 00640B40
Seg Read Error at LBA= 00640FA0
Seg Read Error at LBA= 00641400
Seg Read Error at LBA= 00641860
Seg Read Error at LBA= 00641CC0

Terminal is locked with the following error: (1Ah)-TCG Serial Port Disabled

Can the PC-3000 function with this model? I'm not sure how to proceed.

[osity]

Any update on this family of drives?

[osity]

Still waiting for the answer! Anyone know what family this is and if it's supported by the PC3K?

[osity]

Bump

[Nick_TS]

Hello,

It's Julius1 family with locked terminal prompt. Right now, our developers are working on this issue.

[AJ2008]

I think it may be possible to access this device via a non-SED PCB of Julius1 family after import of RAP CAP SAP IAP parameters from patient ROM to donor ROM - but in this state SA should be readable, however data will be crypted without original PCB and ROM attached

[osity]

Dmitriy_TS,
Any update on this?