WD40EFRX rom corruption ?

[Miodrag]

The drive spin normal and after 30 sec give ready status. Can't load anything except the family and according to the log file look like some kind of rom corruption. I read the native rom (zip file in attach) and I didn't notice the corruption in file. Can somebody look at the rom file and give me a clue what happened with a drive, or If someone has an adequate firmware, it would be nice to try with that option to.

4TB NASware hard drive WD40EFRX-68WT0N0

Techno mode key
Techno mode key......................... : Ok

RAM:
HDD Info reading........................ : Ok
Heads number............................ : 8
Cyl Count............................... : 256

ROM:
Read ROM................................ : Ok
ROM Data size........................... : 512 Kb
Read ROM................................ : Module ID 20B reading error Data request error Device Error Detected: "FM ERR CHECKSUM"

[Filipp_TS]

Hello,

Looks like it's Giant family drive. Isn't it?
What a firmware version of your patient drive?

[Miodrag]

Yes it's Giant family, if I read it correctly from patient rom, firmware version is 00020000

[Maxim_TS]

Source of the post firmware version is 00020000

Your ROM is looking good, FW version is 00010081.
Find donor resources and write 20B ROM module into the patient drive.

[digitalsupport]

There is a 00010081 version in the FW base over @ http://firmware.hddsurgery.com/

[Miodrag]

The case is finished successfully with the help of TS and digitalsupport who provided the right fw resources for repairing corrupted module 20B. After repairing module 20B, the drive load normal and clone 100 %

[Maxim_TS]

Miodrag, nice to hear good news!