ST1000DM003 - Some sector are not reading

[redlabs]

Dear friends ..

I was in problem ,Seagate St1000DM003 Some sector are not reading ,i have done all of basic translator recovery and translator failed in pc3000 ,Some most important data present i that sectors ,Any one kindly help me ,i have team viwer ..Please help me

[Maxim_TS]

redlabs, unreadable only some sectors at the middle of the drive, or you can not see the end of drive? How many LBA do you read? What after F3 T>V4 and V40?

[redlabs]

Source of the post redlabs, unreadable only some sectors at the middle of the drive, or you can not see the end of drive? How many LBA do you read? What after F3 T>V4 and V40?

i can read end of the sector , i cannot read middle of drive ,After running V4 V40 ,Same result ..it is one TB hard disk i can read upto 950000000 crore after that 1750000000 i can read please help us ...

[redlabs]

Source of the post

Source of the post redlabs, unreadable only some sectors at the middle of the drive, or you can not see the end of drive? How many LBA do you read? What after F3 T>V4 and V40?

i can read end of the sector , i cannot read middle of drive ,After running V4 V40 ,Same result ..it is one TB hard disk i can read upto 950000000 crore after that 1750000000 i can read please help us ...

"Fork" searching: 913458481 - 1953525167
HDD power supply switching OFF/ON...
HDD Redynes timeout (10000)
Surface scanning timeout!
Grow up the ATA timeout then restart auto-recovery or proceed manually!
LBA : 913458481

[redlabs]

Source of the post

Source of the post

Source of the post redlabs, unreadable only some sectors at the middle of the drive, or you can not see the end of drive? How many LBA do you read? What after F3 T>V4 and V40?

i can read end of the sector , i cannot read middle of drive ,After running V4 V40 ,Same result ..it is one TB hard disk i can read upto 950000000 crore after that 1750000000 i can read please help us ...

"Fork" searching: 913458481 - 1953525167
HDD power supply switching OFF/ON...
HDD Redynes timeout (10000)
Surface scanning timeout!
Grow up the ATA timeout then restart auto-recovery or proceed manually!
LBA : 913458481

Maxium please help me

[redlabs]

Hello friends ,,

Anyone knows please share the idea .. i am waiting

[Filipp_TS]

Hello,

If you get access to the first and to the last LBA then there is no something problem with translator and unavailable sectors can be bad head(s), scratch on the surface or bad blocks.

If you can't read from someone LBA till the end of drive then it's problem with translator. Follow blog articles or contact Technical support regarding your case.

P.S.

Source of the post "Fork" searching: 913458481 - 1953525167
HDD power supply switching OFF/ON...
HDD Redynes timeout (10000)
Surface scanning timeout!
Grow up the ATA timeout then restart auto-recovery or proceed manually!
LBA : 913458481

As you can see for such procedure utility ask to grown up timeout value.
You can do it in utility settings.