Hello,
I'm trying to find a heads donor for this drive among SATA drives. Just got exact the same one with USB PCB, but if those heads fail is there any alternative?
Drive has 6 heads so it's a little taller than normal drives.
WD10TMVW-11ZSMS4
DCM:HHMT2BBB
Any tips?
WD10TMVW-11ZSMS4 head donor help
Moderator: Maxim_TS
Re: WD10TMVW-11ZSMS4 head donor help
Hello SGdata, Lookf for the close DCM and same family, head map, date and country donor drive.
With best regards
ACELab technical support
ts.acelaboratory.com
blog.acelab.eu.com
ACELab technical support
ts.acelaboratory.com
blog.acelab.eu.com
Re: WD10TMVW-11ZSMS4 head donor help
Does these infos include heads number? My question was is there a SATA version of this drive. With 6 heads.
Re: WD10TMVW-11ZSMS4 head donor help
Dear All;
I am new for PC-3000 UDMA
when I star using the utility I got such error message
HDD MODEL: WD blue WD10JPVX-60JC3T0
Techno mode key
Techno mode key......................... : Ok
RAM:
HDD Info reading........................ : Ok
Heads number............................ : 4
Cyl Count............................... : 256
Zone allocation table................... : HDDs RAM reading error Device Error Detected: "VSCE PERM OVL NOT LOADED. LDR Upload is recomended"
ROM:
Read ROM................................ : Ok
ROM Data size........................... : 256 Kb
Flash ROM dir reading................... : Ok
Flash ROM dir reading (Ext)............. : Ok (Active)
Modules directory address............... : 183 696
SA regions address...................... : by default
Module 02 access........................ : Granted
SA Translator loading................... : Ok
ROM Modules:
ROM version............................. : 16.14G
ROM F/W version......................... : 00160014
Overlay F/W version..................... : 16.14G
Servo F/W version....................... : NA.18
Heads configuration..................... : by map
Heads number............................ : 4
Heads number in use..................... : 4
Switched off heads...................... : No
Heads map............................... : 0,1,2,3
Service area:
Permanent overlay....................... : Not loaded
SA dir reading (ID)..................... : SERVO ERROR CODE BASE SvirActPdFail
SA dir reading (ABA/CHS)................ : Techno key error; unexpected error: Operation aborted
Could you please help me to understand and solve the problem
Regards
I am new for PC-3000 UDMA
when I star using the utility I got such error message
HDD MODEL: WD blue WD10JPVX-60JC3T0
Techno mode key
Techno mode key......................... : Ok
RAM:
HDD Info reading........................ : Ok
Heads number............................ : 4
Cyl Count............................... : 256
Zone allocation table................... : HDDs RAM reading error Device Error Detected: "VSCE PERM OVL NOT LOADED. LDR Upload is recomended"
ROM:
Read ROM................................ : Ok
ROM Data size........................... : 256 Kb
Flash ROM dir reading................... : Ok
Flash ROM dir reading (Ext)............. : Ok (Active)
Modules directory address............... : 183 696
SA regions address...................... : by default
Module 02 access........................ : Granted
SA Translator loading................... : Ok
ROM Modules:
ROM version............................. : 16.14G
ROM F/W version......................... : 00160014
Overlay F/W version..................... : 16.14G
Servo F/W version....................... : NA.18
Heads configuration..................... : by map
Heads number............................ : 4
Heads number in use..................... : 4
Switched off heads...................... : No
Heads map............................... : 0,1,2,3
Service area:
Permanent overlay....................... : Not loaded
SA dir reading (ID)..................... : SERVO ERROR CODE BASE SvirActPdFail
SA dir reading (ABA/CHS)................ : Techno key error; unexpected error: Operation aborted
Could you please help me to understand and solve the problem
Regards
Re: WD10TMVW-11ZSMS4 head donor help
Permanent overlay....................... : Not loaded
SA dir reading (ID)..................... : SERVO ERROR CODE BASE SvirActPdFail
SA dir reading (ABA/CHS)................ : Techno key error; unexpected error: Operation aborted
SA SPT Detect........................... : FAIL
P-List reading.......................... : Module ID 33 reading error Data request error Device Error Detected: "Unknown error code: 3746"
G-List reading.......................... : Module ID 34 reading error Data request error Device Error Detected: "Unknown error code: 3746"
T-List reading.......................... : Module ID 36 reading error Data request error Device Error Detected: "Unknown error code: 3746"
Relo-List reading....................... : Module ID 32 reading error Data request error Device Error Detected: "Unknown error code: 3746"
SA dir reading (ID)..................... : SERVO ERROR CODE BASE SvirActPdFail
SA dir reading (ABA/CHS)................ : Techno key error; unexpected error: Operation aborted
SA SPT Detect........................... : FAIL
P-List reading.......................... : Module ID 33 reading error Data request error Device Error Detected: "Unknown error code: 3746"
G-List reading.......................... : Module ID 34 reading error Data request error Device Error Detected: "Unknown error code: 3746"
T-List reading.......................... : Module ID 36 reading error Data request error Device Error Detected: "Unknown error code: 3746"
Relo-List reading....................... : Module ID 32 reading error Data request error Device Error Detected: "Unknown error code: 3746"
Who is online
Users browsing this forum: No registered users and 8 guests
