st9500423as still busy and led erroe with pcb only

[waleed]

with loader or without when terminal start
it just show
Rst 0x10M

then
LED:00000067 FAddr:00384F72


try loader and without
and try with pcb only
shorting tweezers or not

try to apply this topic http://blog.acelab.eu.com/pc-3000-h ... #more-1912
but no new

will wait reply

[Amarbir[CDR-Labs]]

Source of the post with loader or without when terminal start
it just show
Rst 0x10M

then
LED:00000067 FAddr:00384F72


try loader and without
and try with pcb only
shorting tweezers or not

try to apply this topic http://blog.acelab.eu.com/pc-3000-h ... #more-1912
but no new

will wait reply

Hi ,
How is the drive behaving keeps spinning ,knocking spin down at least give some details please

[waleed]

yes keeps spinning and tried to spin down with no result

[Amarbir[CDR-Labs]]

Source of the post yes keeps spinning and tried to spin down with no result

Sir ,
What you mean by " tried to spin down " .You are contradicting yourself

[DataMedics]

Source of the post

Source of the post yes keeps spinning and tried to spin down with no result

Sir ,
What you mean by " tried to spin down " .You are contradicting yourself

I think he means that he tried to issue a spindown command, and it didn't take.