ST320LT014-9YK142 (1Ah)-TCG Serial Port Disabled

[drdoc]

I have been able to image the entire drive except for a section from 100million to 300 million

when i read in that area the drive gets weird lights and the dwf light comes on.

I have to repower the drive to get it to read again

its really really slow but it is reading - is there anything I can do ?

it get terminal locker message in terminal

tcg locked message

[Amarbir[CDR-Labs]]

Source of the post I have been able to image the entire drive except for a section from 100million to 300 million

when i read in that area the drive gets weird lights and the dwf light comes on.

I have to repower the drive to get it to read again

its really really slow but it is reading - is there anything I can do ?

it get terminal locker message in terminal

tcg locked message

Drdoc ,
I Would Like To Know Your Name First .If Its a Section Then i am Afraid Its the Platter Section Which is Weak .The Solution Would Be To Use New Heads Or clean That Platter Surface Head So That You Could See If there is Improvement in Reading .Also Try To Decrease The Block size .