wd25EZRS-00j99b0 BUSY then ERR. No click.SA needed plz+ty.

[Alexii]

Hi all , i wonder if anyone has the modules , loader for following drive:

wd25EZRS-00j99b0

Techno mode key
Techno mode key......................... : Ok

RAM:
HDD Info reading........................ : Ok
Heads number............................ : 7
Cyl Count............................... : 192

Zone allocation table................... : HDDs RAM reading error - Device Error Detected: "VSCE PERM OVL NOT LOADED. LDR Upload is recomended"

ROM:
ROM reading............................. : Ok
ROM Data size........................... : 256 Kb
ROM version............................. : 20.1UP
ROM generation.......................... : 20.1UP
Link table version...................... : 0B.38.
Consolidated ROM version................ : 0020001U

ROM Modules:
Flash ROM dir reading................... : Ok
Flash ROM dir reading (Ext)............. : Ok (Active)
Modules directory address............... : 283 719
SA regions address...................... : shifted
SA Translator loading................... : Ok

Heads configuration..................... : by map
Heads number............................ : 8
Heads number in use..................... : 7
Switched off heads...................... : Yes
Heads map............................... : 0,2,3,4,5,6,7
ROM Firmware version.................... : 0020001U


Weird case with drive sounding perfectly healthy but sits busy, then after a min ERR light pops up and we spin down . Changed PCB , moved ROM - same symptom. Changed heads - same symptom.

[Alexii]

Ended up not needing the donor. Used Aces advise ( Maxim Sorochinsky ) Work with RAM->DIR upload into RAM while in kernel mode. Got the SA access. Cheers all.