Mariner Family Rom Rebuilding Procedure

[mojimorady]

Dear Guru
hi
these days I am involved with a WD6400BEVT-75A0RT0 (family:Mariner) which suffers from Rom problem .
the hdd doesn't spin up , after changing the PCB with a same one from same family and writing Rom from same family ,
I am able to read 95% of SA Modules .
I tried to rebuild the ROM and ROM's Modules , but unfortunately i did not succeed .
one of my friends told me that for this family we are not able to do ROM rebuilding .

now how can I recovering the data from this hdd ??
waiting for soonest reply

best regards

Mojtaba Morady

[AJ2008]

You can restore ROM from #109 and then write ROM mods from similar donor. Make sure head mapping is the same in resources you write.

[mojimorady]

dear AJ2008
thank you for your reply

1) I could read the Mod#109 before , now how can I restore ROM using that Module ??
2) I also need Rom Modules resources for this hdd ?
can u help me in both of above things ??

best regards
Mojtaba Morady

[AJ2008]

You need to generate ROM from 109 through utility, then write in kernel mode, after repower write donor ROM modules.

Trying to write complete ROM will likely damage the ROM.

I can help over skype if you have it?

[mojimorady]

hi AJ2008
I have skype account
My skype ID is : mojimorady

best regards

[AJ2008]

All solved

[mojimorady]

hi
lots of appreciation to AJ2008
the case was solved

[mojimorady]

All solved

thank u so much !!!!