WD40EZAZ-19SF3B0 loading 190 error using 7.2.15
Posted: 25.12.22, 07:29
MODEL:WD40EZAZ-19SF3B0
Family: Venice
PCB:810011
This is a good hard disk. I used the PC3000-UDMAE - 7.1.10 version to load and parse the 190 module, and everything was OK. However, if I used the latest version of 7.2.15, the following errors occurred during loading. The attachment contains the 190 module and logs.
thank you
Family: Venice
PCB:810011
This is a good hard disk. I used the PC3000-UDMAE - 7.1.10 version to load and parse the 190 module, and everything was OK. However, if I used the latest version of 7.2.15, the following errors occurred during loading. The attachment contains the 190 module and logs.
thank you
- 7.1.10.jpg (8.83 KiB) Viewed 5194 times
- 7.2.15-1.jpg (5.63 KiB) Viewed 5192 times
- 7.2.15-2.jpg (397.71 KiB) Viewed 5192 times
Attachments
- 190.part004.rar
- (662.44 KiB) Downloaded 267 times
- 190.part003.rar
- (2 MiB) Downloaded 239 times
- 190.part002.rar
- (2 MiB) Downloaded 260 times
- 190.part001.rar
- (2 MiB) Downloaded 256 times
- Log.rar
- (1.08 MiB) Downloaded 239 times