wd20nmvw-11av3s2 Rom Transfer from usb pcb to Donor pcb

[Paulfromsurrey]

I have Hard disk wd20nmvw-11av3s2 and I like to Transfer Rom from usb pcb to Donor pcb


I believe this drive has slow response issue so planing to change from usb pcb to sata

so i am looking for any documentation can help me to transfer the rom from this 2060-771961-001 rev A TO 2060-771960-000-REV A

This 2060-771961-001 has 12 pins so i like to know how we can setup com connection

how i can transfer rom information from one pcb to other pcb

Thanks

[digitalsupport]

How to make a Com connection is right here https://forum.acelab.eu.com/viewtop ... 155&t=7397
How to transfer via Boot ROM mode you will find here: https://blog.acelab.eu.com/boot-rom ... rives.html

[Paulfromsurrey]

Thank you Digital but the problem is in this model

there are two rows of 6 pins

not sure where the com connection should be connected which adapter is good to use

[Blizzard]

You can use the WD 2.5 adapter. (see photo for connection)

[Paulfromsurrey]

Thank you Blizzard

[radovanhlavacek]

Hello I have question on this topic... wd20nmvw-11av3s2, PCB 2060-771961-001 REV A. I found two SATA boards 2060-771961-001 REV A, REV P1, P2. Which PCB is compatible?

[jcrepairhdd]

Source of the post Hello I have question on this topic... wd20nmvw-11av3s2, PCB 2060-771961-001 REV A. I found two SATA boards 2060-771961-001 REV A, REV P1, P2. Which PCB is compatible?

Hi from my experience the most compatible would be 2060-771961-001 REV A. All screws line up as well unlike the others I have tried.