PC-3000 Forum

Posted: **08.10.16, 14:23**

with loader or without when terminal start
it just show
Rst 0x10M

then
LED:00000067 FAddr:00384F72

try loader and without
and try with pcb only
shorting tweezers or not

try to apply this topic http://blog.acelab.eu.com/pc-3000-h ... #more-1912
but no new

will wait reply

Posted: **09.10.16, 14:22**

waleed wrote:Source of the post with loader or without when terminal start
it just show
Rst 0x10M

then
LED:00000067 FAddr:00384F72

try loader and without
and try with pcb only
shorting tweezers or not

try to apply this topic http://blog.acelab.eu.com/pc-3000-h ... #more-1912
but no new

will wait reply

Hi ,
How is the drive behaving keeps spinning ,knocking spin down at least give some details please

Posted: **10.10.16, 07:17**

yes keeps spinning and tried to spin down with no result

Posted: **29.10.16, 09:30**

waleed wrote:Source of the post yes keeps spinning and tried to spin down with no result

Sir ,
What you mean by " tried to spin down " .You are contradicting yourself

Posted: **31.10.16, 23:32**

Amarbir[CDR-Labs] wrote:Source of the post
waleed wrote:Source of the post yes keeps spinning and tried to spin down with no result

Sir ,
What you mean by " tried to spin down " .You are contradicting yourself

I think he means that he tried to issue a spindown command, and it didn't take.

PC-3000 Forum

st9500423as still busy and led erroe with pcb only

st9500423as still busy and led erroe with pcb only

Re: st9500423as still busy and led erroe with pcb only

Re: st9500423as still busy and led erroe with pcb only

Re: st9500423as still busy and led erroe with pcb only

Re: st9500423as still busy and led erroe with pcb only