PC-3000 Forum

Hello Friends ...

I have ST500DM002 F/W FJK3 BUSY problem ,I have done shorting the channels and got terimal access
Rst 0x10M
MC Internal LPC Process
Spin Up
(DOS) Table Read FAIL
(DOS) Requesting File Save

(DOS) Table Read FAIL
No HOST FIS-ReadyStatusFlags 0002A185
ASCII Diag mode

F3 T>
ASCII Diag mode

I given command
F3 T>m0,2,2,,,,,22
Max Wr Retries = 00, Max Rd Retries = 00, Max ECC T-Level = 1C, Max Certify Rewrite Retries = 001B

(DOS) Requesting File Save

User Partition Format Successful - Elapsed Time 0 mins 00 secs
Zone re-format was skipped.

But still busy state .. i clear smart also without error ..after power off and ON ,Still busy not able to access the terimal and cant read the drive id

No sound from and HDD running good

Please give me solution friends

Got access

redlabs wrote:Source of the post Got access

Hi,
More Likely it was a Saved Page Mode File Parameters Issue " Realocating Bug " .What Was The Issue i never use these M Commands much as they are never needed much

Probably translator fix worked but HDD takes some time to ready ready state due to relocation processes that were not disabled?