HD300LJ Problem
Posted: 19.11.10, 18:23
hi guru
I have a hdd from trident family as follow :
HD300LJ / 300GB SATA / 7200 RPM / 8M
when i connect it to my PC3000 it remains BUSY , after i press SOFT RESET , it goes to ready and
everything will DETECT correctly -------------------------------------------------------------------------------------------------------------------------------
after utility starts i have this dialoge in my monitor :
Family selected: TRIDENT(SATA)
Model................................... : HD300LJ
Technological ID
Flash version........................... : zt13a42
Heads number............................ : 6
SA SPT.................................. : 928
Modules table loaded from SA
Service Area
Head map................................ : Read sector error (c: 0,h:5,s: 177)(device error detected (UNC))
Head map................................ : 0, 1, 2, 3, 4, 5
Part Number............................. : 141811FL911530
USER password........................... : No
Module header of BISPT.................. : END
----------------------------------------------------------------------------------------------------------------------------------
I also have this in TERMINAL tab :
Wk
HEr:1140 1140
HEr:1140 1140
HEr:1140 1140
----------------------------------------------------------------------------------------------------------------------------------
and after i did SA STRUCTURE TEST I have this dialoge :
MODULES TABLE
-----------------------------------------------------------------------------------------
Module : CrLev : Cyl :Head: Sec : Length : Read : Real Header : Standard Hdr :
-----------------------------------------------------------------------------------------
06 CONFIG : As : 0 : 0 : 177 : 5 : Err : : CONFIG
0A CRITERIA : Dr : 0 : 0 : 257 : 1 : OK : : CRITERIA
15 SETMAX : C : 1 : 0 : 241 : 1 : OK : : SETMAX
16 SECURITY : C : 1 : 0 : 257 : 1 : OK : : SECURITY
64 TW : : 1 : 0 : 305 : 32 : OK : : TW
1F ERRTRK : Dr : 5 : 0 : 241 : 3 : OK : : BER
21 ERRDRV : Dr : 5 : 0 : 273 : 3 : OK : : BER2
26 WKHEAD : : 5 : 0 : 369 : 10 : OK : : WK_HEAD
47 CAPSEL : : 6 : 0 : 529 : 1 : OK : : CAP_SEL
48 CURBPI : : 6 : 0 : 545 : 1 : OK : : CUR_BPI
49 AZLCSM : : 6 : 0 : 561 : 2 : OK : : AZL_CSM
4A AZL_CSM0 : : 6 : 0 : 563 : 2 : OK : : AZL_CSM0
4B AZL_CSM1 : : 6 : 0 : 565 : 2 : OK : : AZL_CSM1
4C AZL_CSM2 : : 6 : 0 : 567 : 2 : OK : : AZL_CSM2
4D AZL_CSM3 : : 6 : 0 : 569 : 2 : OK : : AZL_CSM3
4E AZL_CSM4 : : 6 : 0 : 571 : 2 : OK : : AZL_CSM4
4F AZL_CSM5 : : 6 : 0 : 573 : 2 : OK : : AZL_CSM5
50 AZL_CSM6 : : 6 : 0 : 575 : 2 : OK : : AZL_CSM6
2D AZLBPI : : 6 : 0 : 593 : 2 : OK : : AZL_BPI
2E AZL_BPI0 : : 6 : 0 : 595 : 2 : OK : : AZL_BPI0
2F AZL_BPI1 : : 6 : 0 : 597 : 2 : OK : : AZL_BPI1
30 AZL_BPI2 : : 6 : 0 : 599 : 2 : OK : : AZL_BPI2
31 AZL_BPI3 : : 6 : 0 : 601 : 2 : OK : : AZL_BPI3
32 AZL_BPI4 : : 6 : 0 : 603 : 2 : OK : : AZL_BPI4
33 AZL_BPI5 : : 6 : 0 : 605 : 2 : OK : : AZL_BPI5
34 AZL_BPI6 : : 6 : 0 : 607 : 2 : OK : : AZL_BPI6
35 SPINTIME : : 6 : 0 : 625 : 4 : Err : : SPINTIME
36 POWRTIME : : 6 : 0 : 625 : 2 : Err : : SPINTIME
T-LIST - DEFECTIVE TRACKS LIST
-------------------------------
: # : Zone : Head : Cyl :
-------------------------------
-------------------------------
Maximum possibly defects count: 632
LIST NOT LOADED
I just write the errors of SA STRUCTURE TEST in above
-----------------------------------------------------------------------------------------------------------------
now i have 2 questions :
1st) how can i repair this hdd and recover the DATA from it ?
2nd) if anybody has any files for this family ( Modules, firmware, burns ...) i will apperciate HIM/HER if HE/she
send me those files
Faithfully Yours
Moji Morady
I have a hdd from trident family as follow :
HD300LJ / 300GB SATA / 7200 RPM / 8M
when i connect it to my PC3000 it remains BUSY , after i press SOFT RESET , it goes to ready and
everything will DETECT correctly -------------------------------------------------------------------------------------------------------------------------------
after utility starts i have this dialoge in my monitor :
Family selected: TRIDENT(SATA)
Model................................... : HD300LJ
Technological ID
Flash version........................... : zt13a42
Heads number............................ : 6
SA SPT.................................. : 928
Modules table loaded from SA
Service Area
Head map................................ : Read sector error (c: 0,h:5,s: 177)(device error detected (UNC))
Head map................................ : 0, 1, 2, 3, 4, 5
Part Number............................. : 141811FL911530
USER password........................... : No
Module header of BISPT.................. : END
----------------------------------------------------------------------------------------------------------------------------------
I also have this in TERMINAL tab :
Wk
HEr:1140 1140
HEr:1140 1140
HEr:1140 1140
----------------------------------------------------------------------------------------------------------------------------------
and after i did SA STRUCTURE TEST I have this dialoge :
MODULES TABLE
-----------------------------------------------------------------------------------------
Module : CrLev : Cyl :Head: Sec : Length : Read : Real Header : Standard Hdr :
-----------------------------------------------------------------------------------------
06 CONFIG : As : 0 : 0 : 177 : 5 : Err : : CONFIG
0A CRITERIA : Dr : 0 : 0 : 257 : 1 : OK : : CRITERIA
15 SETMAX : C : 1 : 0 : 241 : 1 : OK : : SETMAX
16 SECURITY : C : 1 : 0 : 257 : 1 : OK : : SECURITY
64 TW : : 1 : 0 : 305 : 32 : OK : : TW
1F ERRTRK : Dr : 5 : 0 : 241 : 3 : OK : : BER
21 ERRDRV : Dr : 5 : 0 : 273 : 3 : OK : : BER2
26 WKHEAD : : 5 : 0 : 369 : 10 : OK : : WK_HEAD
47 CAPSEL : : 6 : 0 : 529 : 1 : OK : : CAP_SEL
48 CURBPI : : 6 : 0 : 545 : 1 : OK : : CUR_BPI
49 AZLCSM : : 6 : 0 : 561 : 2 : OK : : AZL_CSM
4A AZL_CSM0 : : 6 : 0 : 563 : 2 : OK : : AZL_CSM0
4B AZL_CSM1 : : 6 : 0 : 565 : 2 : OK : : AZL_CSM1
4C AZL_CSM2 : : 6 : 0 : 567 : 2 : OK : : AZL_CSM2
4D AZL_CSM3 : : 6 : 0 : 569 : 2 : OK : : AZL_CSM3
4E AZL_CSM4 : : 6 : 0 : 571 : 2 : OK : : AZL_CSM4
4F AZL_CSM5 : : 6 : 0 : 573 : 2 : OK : : AZL_CSM5
50 AZL_CSM6 : : 6 : 0 : 575 : 2 : OK : : AZL_CSM6
2D AZLBPI : : 6 : 0 : 593 : 2 : OK : : AZL_BPI
2E AZL_BPI0 : : 6 : 0 : 595 : 2 : OK : : AZL_BPI0
2F AZL_BPI1 : : 6 : 0 : 597 : 2 : OK : : AZL_BPI1
30 AZL_BPI2 : : 6 : 0 : 599 : 2 : OK : : AZL_BPI2
31 AZL_BPI3 : : 6 : 0 : 601 : 2 : OK : : AZL_BPI3
32 AZL_BPI4 : : 6 : 0 : 603 : 2 : OK : : AZL_BPI4
33 AZL_BPI5 : : 6 : 0 : 605 : 2 : OK : : AZL_BPI5
34 AZL_BPI6 : : 6 : 0 : 607 : 2 : OK : : AZL_BPI6
35 SPINTIME : : 6 : 0 : 625 : 4 : Err : : SPINTIME
36 POWRTIME : : 6 : 0 : 625 : 2 : Err : : SPINTIME
T-LIST - DEFECTIVE TRACKS LIST
-------------------------------
: # : Zone : Head : Cyl :
-------------------------------
-------------------------------
Maximum possibly defects count: 632
LIST NOT LOADED
I just write the errors of SA STRUCTURE TEST in above
-----------------------------------------------------------------------------------------------------------------
now i have 2 questions :
1st) how can i repair this hdd and recover the DATA from it ?
2nd) if anybody has any files for this family ( Modules, firmware, burns ...) i will apperciate HIM/HER if HE/she
send me those files
Faithfully Yours
Moji Morady