PC-3000 Forum

Hello

Techno mode key
Techno mode key......................... : Ok

RAM:
HDD Info reading........................ : Ok
Heads number............................ : 1
Cyl Count............................... : 64

Zone allocation table................... : Ok
SA SPT.................................. : 533

ROM:
ROM reading............................. : Ok
ROM Data size........................... : 128 Kb
ROM version............................. : 08.92C
ROM generation.......................... : 08.92C
Link table version...................... : 01.B1.
Consolidated ROM version................ : 00080092

ROM Modules:
Heads configuration..................... : default
Heads map............................... : default
ROM Firmware version.................... : 0892C

Service area:
Permanent overlay....................... : Not loaded
SA dir reading (ID)..................... : DISK SERVO NOT READY ERROR
Configuration reading................... : Module 02 not found



When i start WD utility it asked to Upload LDR (I uploaded LDR)
After that above log,
Head Test showing OK
Clicking sound while SA Loading

is it heads issue?

Kindly guide


Thanks in advance