PC-3000 Forum

Please anybody have LDR of " WD5000BPVT-22HXZT3" ,update me


betty
crystal

You need to specify which fw version it is running. LDR needs to be compatible with ROM at your patient HDD

thank u AJ2008,
I am sorry because i need LDR needed for "D5000BPVT-55HXZT3". FW i don't know. because the sticker/Label of Hdd was discarded.So Please Help me


betty
Crystal

when you enter WD utility, enter Kernel mode and in the log you will see 'ROM Version', the numbers following this represent the version:

ROM reading............................. : Ok
ROM Data size........................... : 256 Kb
ROM version............................. : 65.48K
ROM generation.......................... : 65.48K
Link table version...................... : 05.0H.
Consolidated ROM version................ : 00650048

Heads configuration..................... : by map
Heads number............................ : 2
Heads number in use..................... : 2
Switched off heads...................... : No
Heads map............................... : 0,1
ROM Firmware version.................... : 00650048

Write here this version and someone can try to help. But you should be aware that using LDR does not work on some new families. What is the symptoms you are seeing? Maybe its something you cannot solve with loader, or maybe something you can solve without one.

Hi AJ2008,

Here I am posting the Log:

Techno mode key
Techno mode key......................... : Ok

RAM:
HDD Info reading........................ : Ok
Heads number............................ : 3
Cyl Count............................... : 256

ROM:
ROM reading............................. : Ok
ROM Data size........................... : 256 Kb
ROM version............................. : 65.0AB
ROM generation.......................... : 65.0AB
Link table version...................... : 05.0C.
Consolidated ROM version................ : 0065000A

ROM Modules:
Flash ROM dir reading................... : Ok
Modules directory address............... : FIXED
SA regions address...................... : by default

SA Translator loading................... : Ok

Heads configuration..................... : by map
Heads number............................ : 3
Heads number in use..................... : 3
Switched off heads...................... : No
Heads map............................... : 0,1,2
ROM Firmware version.................... : 0065000A


Betty
Crystal

The version you need is 0065000A.

The closest I have is 00650007 which is not good enough. Hopefully someone else here has it for you.

Thanku AJ2008....


I am Waiting for somebody ,those who have the same LDR....

Please help ..
Betty
Crystal

i have same ROM but unfortunately for below model:
WDC WD5000BPVT-75HXZT3

rezafarah wrote:i have same ROM but unfortunately for below model:
WDC WD5000BPVT-75HXZT3

If by 'same rom' you mean same version, then module #11 from this resource will be compatible as loader

AJ2008 wrote:

rezafarah wrote:i have same ROM but unfortunately for below model:
WDC WD5000BPVT-75HXZT3

If by 'same rom' you mean same version, then module #11 from this resource will be compatible as loader

yes AJ2008 i have this ROM version:0065000A for WD5000BPVT-75XZT3
link for module 11 and ROM modules:
http://www.speedyshare.com/JKkZC/downlo ... 75XZT3.rar

HI aj2008,

i Download the file.But this files not in recognized in PC3000. So once again upload.

Betty
Crystal

Extract the files and rename the file called '11' to '11.rpm' then you can use it

module 11 is worked. but ROM Module is not working

Betty
Crystal