PC-3000 Forum

I have one working hard disk wd10eucx-73yz1y0. I have taken Full SA Backup. I have backup of all the tracks, Rom and Modules.

By Mistake the hdd is module -11 is over Written with other. Not the hdd is not detecting. HDD-ID does not shows model name, serial, size or firmware.
Log File

Techno mode key
Techno mode key......................... : Ok

RAM:
HDD Info reading........................ : Ok
Heads number............................ : 3
Cyl Count............................... : 256

ROM:
ROM reading............................. : Ok
ROM Data size........................... : 256 Kb
ROM version............................. : 51.22A
ROM generation.......................... : 51.22A
Link table version...................... : 00.09.
Consolidated ROM version................ : 00510022

ROM Modules:
Flash ROM dir reading................... : Ok
Flash ROM dir reading (Ext)............. : Ok (Active)
Modules directory address............... : 382 448
SA regions address...................... : by default
SA Translator loading................... : Ok
SA defects assigned..................... : 1

Heads configuration..................... : by map
Heads number............................ : 3
Heads number in use..................... : 3
Switched off heads...................... : No
Heads map............................... : 0,1,3
ROM Firmware version.................... : 00510022

I have not other donor hdd so hot-swap is not possible.

Thanks,

I have recieved the donor & finish by hot swap.

Thanks,