PC-3000 Forum

w10eavs-00d7b0 - wont ram head edit

pc3k v4.8

Techno mode key......................... : Ok

RAM:
HDD Info reading........................ : Ok
Heads number............................ : 1
Cyl Count............................... : 170

ROM:
ROM reading............................. : Ok
ROM Data size........................... : 192 Kb
ROM version............................. : 05.1NB
ROM generation.......................... : 05.1NB
Link table version...................... : 04.2C.
Consolidated ROM version................ : 0005001N

ROM Modules:
Flash ROM dir reading................... : Ok
Modules directory address............... : FIXED
Heads configuration..................... : by map
Heads number............................ : 6
Heads number in use..................... : 6
Switched off heads...................... : No
Heads map............................... : 2,3,4,5,6,7
ROM Firmware version.................... : 0005001N


Kermit
Lib: Kermit
Offset (hex): 4000000
Size: 100000
Map Size: 8
==================================
\x06\x02\x03\x04\x05\x06\x07\x00\x00
\x06\x00\x02\x03\x04\x05\x06\x07\x00\x00
HDDs RAM reading error - Device Error Detected: "VSCE PERM OVL NOT LOADED. LDR Upload is recomended"
HDDs RAM reading error - Device Error Detected: "VSCE PERM OVL NOT LOADED. LDR Upload is recomended"
RAM Table reading error - Device Error Detected: "VSCE STATIC FILE INVALID"

What is your UDMA software version? Is it 4.9 or 4.7 ?

its pc3k 4.8

i just upgraded to 4.9.2

I mentioned the version at the top of my original post...