Page 1 of 1
WD3200AVBS-63TAA0 PCB problem
Posted: 11.01.11, 13:24
by hassan
I have WD3200AVBS-63TAA0 the pcb no is 2061-701444-000
the PCB was burnt
I have the same PCB nimber 2061-701444 but my question is :
What is the Family of this drive?
Any on have Rom for xxTAxx family?
Attachments

- PCB.jpg (286.51 KiB) Viewed 9207 times

- WD3200AVBS-63TAA0.jpg (38.64 KiB) Viewed 9207 times
Re: WD3200AVBS-63TAA0 PCB problem
Posted: 11.01.11, 13:39
by einstein9
move the ROM from defected hdd pcb to working pcb and good luck
Re: WD3200AVBS-63TAA0 PCB problem
Posted: 11.01.11, 13:48
by hassan
This model have no rom chip
the rom in the CPU chip and it was burnt
Re: WD3200AVBS-63TAA0 PCB problem
Posted: 11.01.11, 14:29
by einstein9
sorry for the mistake ur right here i did not notice
BUT
my best guess is Caviar
can u post the image of pcb other side
just to make sure
Re: WD3200AVBS-63TAA0 PCB problem
Posted: 11.01.11, 15:27
by hassan
Thank you for the help
Attachments

- PCB2.jpg (34.94 KiB) Viewed 9203 times
Re: WD3200AVBS-63TAA0 PCB problem
Posted: 16.01.11, 10:58
by einstein9
my best guess for this is the Spider here since this pcb can be used for many families
another suggestion if you have a backup resources for it, open module C5
you will find the family there
good luck
Re: WD3200AVBS-63TAA0 PCB problem
Posted: 17.01.11, 09:46
by hassan
Dear einstein9
Thank you for help but unfortunately i don't have any resource for the drive
Re: WD3200AVBS-63TAA0 PCB problem
Posted: 18.01.11, 10:05
by dmarques
If you use safe mode, you can see family.
Re: WD3200AVBS-63TAA0 PCB problem
Posted: 18.01.11, 10:46
by hassan
Thank you datalabace
but the PCB was burnt so i can not run kernel mode
Re: WD3200AVBS-63TAA0 PCB problem
Posted: 18.01.11, 15:47
by dmarques
Why do you want to know it's family?
Re: WD3200AVBS-63TAA0 PCB problem
Posted: 24.01.11, 07:10
by hassan
I want to write Rom from the same family to get access to SA and recover the Rom of HDD
The i can get the data
Re: WD3200AVBS-63TAA0 PCB problem
Posted: 24.01.11, 14:25
by einstein9
hassan, u dont need to know or select family to write the rom
pick any, and write
this will not effect anything since ur writing rom
good luck