Page 1 of 1
WD400BB-22FJA1 Problem
Posted: 19.01.10, 16:32
by datacare
how to solve this problem
Attachments
- WD400BB-22FJA1.jpg (30.36 KiB) Viewed 3789 times
Re: WD400BB-22FJA1 Problem
Posted: 19.01.10, 17:22
by pcimage
1. Is PCB 100% sure to be original?
2. Have you checked the FW modules?
Re: WD400BB-22FJA1 Problem
Posted: 19.01.10, 18:40
by AJ2008
The XYZ symptoms are common and can be caused by mismatch of ROM and ATA Overlay (mod 11), damaged adaptive modules, incompatible ROM... Verify PCB is native, and check SA structure for errors
Re: WD400BB-22FJA1 Problem
Posted: 24.01.10, 07:57
by datacare
It is donor board only. Now it is working after replacing the flash ROM-U12 chip from the original board.
Thanks
Sundar Rajan.P