WD1200JB-00FUA0

[ZeBong]

Hi,

Have the disk that when arrive to me the disk dont give the ID.
I try to cut some heads to see if it works but nothing happen.
Afther one week get back to the disk, and now it can give the ID.


Techno mode key:
HDD geometry loading.................... : Ok
Cyl Count............................... : 15468
Head Count.............................. : 4
SPT..................................... : 900

RAM:
Zone allocation table................... : Ok
ROM version............................. : 15.BE.
SA FW version........................... : 15.BER
Link table version...................... : 05.66.

Serial ROM:
Read ROM................................ : Ok
Heads configuration..................... : From map
Heads number............................ : 6
The number of heads in use.............. : 4
Disabled heads.......................... : Yes
Head map................................ : 0,1,4,5

Service area:
Modules table loading................... : Ok (Copy 0)
Configuration loading................... : Ok
Master Password......................... : has not been set
User Password........................... : has not been set
Translation overlay checking............ : Ok



SA surface verification

Initial cylinder........................ : -1
Final cylinder.......................... : -20
Head.................................... : 0,1
Cyl -1 Head 0........................... : Errors : 0
Cyl -1 Head 1........................... : Errors : 0
Cyl -2 Head 0........................... : Errors : 0
Cyl -2 Head 1........................... : Errors : 0
Cyl -3 Head 0........................... : Errors : 0
Cyl -3 Head 1........................... : Errors : 0
Cyl -4 Head 0........................... : Errors : 0
Cyl -4 Head 1........................... : Errors : 0
Cyl -5 Head 0........................... : Errors : 0
Cyl -5 Head 1........................... : Errors : 0
Cyl -6 Head 0........................... : Errors : 0
Cyl -6 Head 1........................... : Errors : 0
Cyl -7 Head 0........................... : Errors : 0
Cyl -7 Head 1........................... : Errors : 0
Cyl -8 Head 0........................... : Errors : 2
--------------------------------------------------
Sectors :Error
--------------------------------------------------
304.....................................
319.....................................
--------------------------------------------------
Cyl -8 Head 1........................... : Errors : 0
Cyl -9 Head 0........................... : Errors : 0
Cyl -9 Head 1........................... : Errors : 0
Cyl -10 Head 0.......................... : Errors : 0
Cyl -10 Head 1.......................... : Errors : 0
Cyl -11 Head 0.......................... : Errors : 0
Cyl -11 Head 1.......................... : Errors : 0
Cyl -12 Head 0.......................... : Errors : 0
Cyl -12 Head 1.......................... : Errors : 0
Cyl -13 Head 0.......................... : Errors : 0
Cyl -13 Head 1.......................... : Errors : 0
Cyl -14 Head 0.......................... : Errors : 0
Cyl -14 Head 1.......................... : Errors : 0
Cyl -15 Head 0.......................... : Errors : 0
Cyl -15 Head 1.......................... : Errors : 0
Cyl -16 Head 0.......................... : Errors : 0
Cyl -16 Head 1.......................... : Errors : 0
Cyl -17 Head 0.......................... : Errors : 0
Cyl -17 Head 1.......................... : Errors : 0
Cyl -18 Head 0.......................... : Errors : 0
Cyl -18 Head 1.......................... : Errors : 0
Cyl -19 Head 0.......................... : Errors : 0
Cyl -19 Head 1.......................... : Errors : 0
Cyl -20 Head 0.......................... : Errors : 16
--------------------------------------------------
Sectors :Error
--------------------------------------------------
1.......................................
11......................................
15 -- 16................................
20 -- 21................................
25 -- 26................................
30 -- 31................................
35 -- 36................................
40 -- 41................................
45 -- 46................................
--------------------------------------------------
Cyl -20 Head 1.......................... : Errors : 24
--------------------------------------------------
Sectors :Error
--------------------------------------------------
1.......................................
10 -- 11................................
15 -- 16................................
17......................................Drive is not ready
20 -- 21................................
22......................................Drive is not ready
25 -- 26................................
27......................................Drive is not ready
30 -- 31................................
32......................................Drive is not ready
35 -- 36................................
37......................................Drive is not ready
40 -- 41................................
42......................................Drive is not ready
45 -- 46................................
47......................................Drive is not ready
--------------------------------------------------

SA surface verification completed


Make a head test :

it gives OK,

Heads test
Cylinder to test........................ : -25
Heads to test........................... : 0,1,2,3
Head 0.................................. : Ok
Head 1.................................. : Ok
Head 4.................................. : Ok
Head 5.................................. : Ok


But some times i have to test head by head to give head ok


Try to build a head maps but it give error.

Error execute=LBA to CHS convert error Device Error Detected 51/04 (ABR)