PC-3000 Forum

Hello,

This disk when connect to the pc3kumda dont give ID
So i have to do head map to head 6 and 7.
Now i can have the ID correct and the LBA size correct.
When i enter in the DE i try to edit sector 63, but i have dark green error ECC ERROR.
I know that i have 8 heads but are using 6 heads.

What i have to do in the LBA size to see the data.


Thanks
ZeBong


Techno mode key
Techno mode key......................... : Ok

RAM:
Zone allocation table................... : Ok
Cyl Count............................... : 64
SA SPT.................................. : 864

Head number reading..................... : Ok
Heads number............................ : 5

ROM:
ROM reading............................. : Ok
ROM Data size........................... : 256 Kb
ROM version............................. : 07.1PE
ROM generation.......................... : 07.1PE
Link table version...................... : 02.46.
Heads configuration..................... : by map
Heads number............................ : 8
Heads number in use..................... : 6
Switched off heads...................... : Yes
Head map................................ : 0,1,2,3,4,5

Firmware version........................ : 071P?

Service area:
SA dir reading.......................... : Ok (Copy 0)
Configuration reading................... : Ok
Master Password......................... : has not been set
User Password........................... : has not been set

You can't.
You have to swap heads.
Head map is useful for diagnosis, but now for data recover.

datalabace wrote:You can't.
You have to swap heads.
Head map is useful for diagnosis, but now for data recover.

Agreed on that.
Although there is much of talk about that, can somebody confirm recovery on ZEUS withouth one or more head?