WD2002FAEX- 007BA0 - Support RAM head map editing?

[stevan.vukovic]

Are family Manpl RE supports RAM head map editing?

***** ***** ***** ***** ***** *****
Techno mode key
Techno mode key......................... : Ok

RAM:
HDD Info reading........................ : Ok
Heads number............................ : 8
Cyl Count............................... : 256

ROM:
ROM reading............................. : Ok
ROM Data size........................... : 512 Kb
ROM version............................. : 05.63F
ROM generation.......................... : 05.63F
Link table version...................... : 01.35.
Consolidated ROM version................ : 00050063

ROM Modules:
Flash ROM dir reading................... : Ok (Active)
Flash ROM dir reading (Ext)............. : Ok
Modules directory address............... : 71 895
SA regions address...................... : by default
SA Translator loading................... : Ok

Heads configuration..................... : by map
Heads number............................ : 8
Heads number in use..................... : 8
Switched off heads...................... : No
Heads map............................... : 0,1,2,3,4,5,6,7
ROM Firmware version.................... : 00050063

***** ***** ***** ***** ***** *****
TRY = RAM head map edit
***** ***** ***** ***** ***** *****
Code type to check...................... : TypeN
Code addr............................... : FFE00000
Code size............................... : 327681
Code reading............................ : RAM Range FFE00000 (050001) reading error Device Error Detected: "VSCE KEY SECTOR MUST PRECEED DATA XFER REQUEST"
No HDD RAM access, LDR upload is recomended
***** ***** ***** ***** ***** *****