WD 5000AAJS SA Problem

[d.rob]

Hello,

i am a new user of PC3000, i ve some problem with the SA of this drive.
maybe i need to writte modules?

hard drive is detected as: Marvell Tornado

SA SPT: manually, default value 500 doesn't work....

SA tracks, SA Surface, are OK, all in ROM too.
But no modules in SA found.

and here the log at supply:
------------------------------------------------------------------

Techno mode key:
Tech on................................. : Ok

RAM:
Zone allocation table................... : HDDs RAM reading error Techno CMD sending error Device Error Detected 51/04 (ABR)
SA SPT.................................. : SA SPT determination error Techno CMD sending error Device Error Detected 51/04 (ABR)

Head number reading..................... : Ok
Heads number............................ : 6

ROM:
ROM Data size........................... : 192 Kb
ROM reading............................. : Ok
ROM version............................. : 21.68Q
ROM generation.......................... : 21.68Q
Link table version...................... : 22.50.
Heads configuration..................... : by map
Heads number............................ : 6
Heads number in use..................... : 6
Switched off heads...................... : No
Head map................................ : 2,3,4,5,6,7

Firmware version........................ : 00210068

Service area:
SA dir reading.......................... : Unknown error. Code(0)
SA Copies avalabled..................... : NONE

Configuration reading................... : Module 02 not found


------------------------------------------------------------------

thanks, and nice to meet you ACELab community!

[Igor]

Hello d.rob,

SA dir reading.......................... : Unknown error. Code(0)

This error appears because of uncorrect instalation process.
So, reinstall the utility.

Regards

[d.rob]

hello!

i've reinstall PC3000 UDMA utility from the CDrom, new act file...etc but the problem of code 0 still, is it an installation problem at 100% ?? the hard drive is a marvell familly, tornado. maybe tornado is not supported, or less than others.

[Igor]

Hello d.rob,

Could you publish a report after:
1) trecks reading(except - 1)
2) checking LBA range(from 0 to 9)

Regards