ST1000333AS busy problem with led:00000cd err

jasminehell · Postby **jasminehell** » 20.07.15, 12:46

hi

ive got a ST1000333AS and it is just busy
both tried short connect and isolating PCB
and sill cannot appear F3 T>/

here is the code
Rst 0x20M
LED:000000CD FAddr:00010303
LED:000000CD FAddr:00010303

AJ2008 · Postby **AJ2008** » 20.07.15, 12:54

T> should be ok on this without need to short circuit. What is FW version?

jasminehell · Postby **jasminehell** » 21.07.15, 07:55

AJ2008 wrote:T> should be ok on this without need to short circuit. What is FW version?

it is cc1f,and im lookin for a same hdd.
does hot swap work?

AJ2008 · Postby **AJ2008** » 21.07.15, 11:03

HotSwap wont work.

IF you place paper to isolate heads from PCB and wait some time, it should reach ready with T> access. What happens if you isolate and wait for it?

jasminehell · Postby **jasminehell** » 22.07.15, 07:27

when i isolating PCB,no code.and it seems it's ready.
but when ctrl+z ,nothing happens.

PC-3000 Forum