PC-3000 Forum

I have Seagate 2Tb hdd st2000dm001 Remains busy. Motor spin ok and running, No clicking noise. Check with the other pcb but problem remains same.

Terminal output.

Boot 0x40M
Spin Up
RECOV Servo Op=0100 Resp=0005
TCC-0026[0x00026F7C][0x000270DF][0x000270DF]ZZZZMMMMMMMMMMMMMMMZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMddddddW
PreampFaultStatus = 0000YW
PreampFaultStatus = 0000YWMMMMMM

What is the mean by 0000yW preampfault?

Hi Amit,

have you found a solution for this problem?

I have the same problem with same model after head stack replacement - terminal output as Amit posted.

Anybody else with a solution?

I doubt in Rom corruption or Head adaptives. What is the usage of Block-1 and Block-2 option in rom for SAP+RAP+IAP Modules change in Ram?

Arihant wrote:I doubt in Rom corruption or Head adaptives. What is the usage of Block-1 and Block-2 option in rom for SAP+RAP+IAP Modules change in Ram?

Just wash the PCB and do short pointing for access terminal
already did on 2 Drives with same preampfault error.

I have check with other pcb (rom Swapped).
Still same problem.

Is any other check points ?

Thanks,