PC-3000 Forum

HDD family detecting...


Family ID: 58
Selected family......................... : 58, Grenada
Model by ID............................. : ST2000DM001-1E6164

Loading default settings!
Use the options dialog to review and save utility settings.
Then press OK!


Family default settings loading!


Tech Key...

Requesting FW Pkg ver ........ GSG22C.CCD4.BR0N79.CC45


Detecting Phys Sct Size...
Result.................................. : 4096

Detecting Max Head number...
Phys. heads............................. : 4

Obtaining Saved Mode Pages File information...
Reading Saved Mode Pages...
Parsing Saved Mode Pages...

LBA alignment........................... : 0

Obtaining Registry File information...
Reading Registry File...
Parsing Registry File...

Media Cache
===========
MC : enabled
MC Size : 0x9A9D00
MCMT Ver : MCMTV06

Collecting Sys Files information...
ID Len
===============
0 36 Reserved Defect Table (SA defect table)
1 2 Drive Information File (DIF)
2 16 Performance Parameter File (PPF)
3 7782 Primary Defect File (P-List))
5 4 Manufacturing Information File (MIF)
8 4800
B 1000
C 122880 Serial Port Test Results File (Self Scan Log)
D 160
E 432 Data Integrity Check (DIC), HEAD 0
F 223 DIC Dummy File
13 8 Disc Registry File (settings, security, etc)
15 100 BGMS File (Directed Offline Scan)
16 2
17 40
19 24 Log File
1A 33 Log File
1B 1 Log File
1C 9
1D 128 Physical Overlay File 0
1E 128 Physical Overlay File 1
22 80 Drive Self Test (DST), Head 0
23 80 Drive Self Test (DST), Head 1
24 80 Drive Self Test (DST), Head 2
25 80 Drive Self Test (DST), Head 3
2A 9 Saved Mode Pages (HDD settings)
2B 9990 R/W Operating Parameters (translator, etc)
2C 432 Data Integrity Check (DIC), HEAD 1
2D 432 Data Integrity Check (DIC), HEAD 2
2E 432 Data Integrity Check (DIC), HEAD 3
33 4576
34 640 Packed CONGEN XML definition
39 8192
3A 4
3D 3072
3E 3072
3F 4576
40 7
41 2180
42 4096
43 10241
44 1130220
46 226044
47 226044
48 226044
49 226044
4A 226044
4B 8192
4F 14336
Collecting Sys File Infos completed

Collecting DT Infos...
ROM:
ID MemOffs Len
===========================
0 40030200 40944 Read Adaptive Parameters File (RAP)
1 40030000 512 Controller Adaptive Parameters File (CAP)
4 1D400 7168 Servo Adaptive Parameter File (SAP)
40002000 13288
total 20456
5 6C000 81920 Servo Firmware Table
A 25E404 1024 Seek Profile
13 40129CA0 768 Dependent Zone Table for User Area
14 40129FA0 64 Dependent Zone Table for System Area
15 0 524288 Flash ROM
1D 40030220 2592 VBAR Configuration File
1E 40031260 3232 Zone Format Parameters File
26 40127F90 7440
27 40127DF8 408

RAM:
ID MemOffs Len
===========================
0 40030200 40944 Read Adaptive Parameters File (RAP)
1 40030000 512 Controller Adaptive Parameters File (CAP)
2 40030C40 1568 Zone Table
4 1D400 7168 Servo Adaptive Parameter File (SAP)
40002000 13288
total 20456
5 6C000 81920 Servo Firmware Table
6 11F2BC0 81956 Servo Flaw Table
A 25E404 1024 Seek Profile
13 40129CA0 768 Dependent Zone Table for User Area
14 40129FA0 64 Dependent Zone Table for System Area
15 0 524288 Flash ROM
16 40030200 32 Drive Configuration Table
17 40032278 1632 Temperature Control Configuration
1D 40030220 2592 VBAR Configuration File
1E 40031260 3232 Zone Format Parameters File
1F 4032C918 3840 RW working user preamp table
20 4032D818 128 RW working system preamp table
26 40127F90 7440
27 40127DF8 408

Collecting DT Infos completed


Reading autotuning buffer............... Ok
Searching module table in RAM........... Ok
Searching volume 3 file table in RAM.... Ok
Searching volume 0 file table in RAM.... Ok
Searching SMP RAM FID in RAM............ Ok
Searching Non Resident G-List FID in RAM Ok
Searching CFW OVL FID in RAM............ Ok
Searching DT table(RAM, WR) in RAM...... Ok
Searching DT table(RAM, RD) in RAM...... Ok

System Files I/O method detection... ATA(direct)



Test : HDD resources backup
Folder: C:\Program Files\ACE Lab\PC-3000\Bin\!Profiles\SgF3\Grenada\ST2000DM001-1E6164-CC45-Z1E2XB2L\Data\SABackup\



Reading ROM to profile folder
Folder: C:\Program Files\ACE Lab\PC-3000\Bin\!Profiles\SgF3\Grenada\ST2000DM001-1E6164-CC45-Z1E2XB2L\Data\SABackup\ROM\
Result.................................. : Ok


Reading DT to profile folder
Folder: C:\Program Files\ACE Lab\PC-3000\Bin\!Profiles\SgF3\Grenada\ST2000DM001-1E6164-CC45-Z1E2XB2L\Data\SABackup\CPDir\

DT 0000 (Flash ROM), Read Adaptive Parameters File (RAP).............. : Error
Error : Rq Rd DT part ID 0, Offs 0x0 err! Tech state 0x72, 0x05260207
DT 0001 (Flash ROM), Controller Adaptive Parameters File (CAP)........ : Ok
DT 0004 (Flash ROM), Servo Adaptive Parameter File (SAP).............. : Error
Error : Rq Rd DT part ID 4, Offs 0x0 err! Tech state 0x72, 0x05260207
DT 0005 (Flash ROM), Servo Firmware Table............................. : Ok
DT 000A (Flash ROM), Seek Profile..................................... : Ok
DT 0013 (Flash ROM), Dependent Zone Table for User Area............... : Ok
DT 0014 (Flash ROM), Dependent Zone Table for System Area............. : Ok
DT 0015 (Flash ROM), Flash ROM........................................ : Ok
DT 001D (Flash ROM), VBAR Configuration File.......................... : Ok
DT 001E (Flash ROM), Zone Format Parameters File...................... : Ok
DT 0026 (Flash ROM)................................................... : Ok
DT 0027 (Flash ROM)................................................... : Ok
DT 0000 (RAM), Read Adaptive Parameters File (RAP).................... : Ok
DT 0001 (RAM), Controller Adaptive Parameters File (CAP).............. : Ok
DT 0002 (RAM), Zone Table............................................. : Ok
DT 0004 (RAM), Servo Adaptive Parameter File (SAP).................... : Ok
DT 0005 (RAM), Servo Firmware Table................................... : Ok
DT 0006 (RAM), Servo Flaw Table....................................... : Ok
DT 000A (RAM), Seek Profile........................................... : Ok
DT 0013 (RAM), Dependent Zone Table for User Area..................... : Ok
DT 0014 (RAM), Dependent Zone Table for System Area................... : Ok
DT 0015 (RAM), Flash ROM.............................................. : Ok
DT 0016 (RAM), Drive Configuration Table.............................. : Ok
DT 0017 (RAM), Temperature Control Configuration...................... : Ok
DT 001D (RAM), VBAR Configuration File................................ : Ok
DT 001E (RAM), Zone Format Parameters File............................ : Ok
DT 001F (RAM), RW working user preamp table........................... : Ok
DT 0020 (RAM), RW working system preamp table......................... : Ok
DT 0026 (RAM)......................................................... : Ok
DT 0027 (RAM)......................................................... : Ok
DT reading process completed
Result.................................. : Error

Reading modules to profile folder
Folder: C:\Program Files\ACE Lab\PC-3000\Bin\!Profiles\SgF3\Grenada\ST2000DM001-1E6164-CC45-Z1E2XB2L\Data\SABackup\ModDir\

Will be skipped : 000C, 000E, 000F, 0022, 0023, 0024, 0025, 002C, 002D, 002E, 0044, 0046, 0047, 0048, 0049, 004A

Module 0000, Reserved Defect Table (SA defect table).................. : Ok
Module 0001, Drive Information File (DIF)............................. : Ok
Module 0002, Performance Parameter File (PPF)......................... : Ok
Module 0003, Primary Defect File (P-List))............................ : Ok
Module 0005, Manufacturing Information File (MIF)..................... : Ok
Module 0008........................................................... : Ok
Module 000B........................................................... : Ok
Module 000D........................................................... : Ok
Module 0013, Disc Registry File (settings, security, etc)............. : Ok
Module 0015, BGMS File (Directed Offline Scan)........................ : Ok
Module 0016........................................................... : Ok
Module 0017........................................................... : Ok
Module 0019, Log File................................................. : Ok
Module 001A, Log File................................................. : Ok
Module 001B, Log File................................................. : Ok
Module 001C........................................................... : Ok
Module 001D, Physical Overlay File 0.................................. : Ok
Module 001E, Physical Overlay File 1.................................. : Ok
Module 002A, Saved Mode Pages (HDD settings).......................... : Ok
Module 002B, R/W Operating Parameters (translator, etc)............... : Ok
Module 0033........................................................... : Ok
Module 0034, Packed CONGEN XML definition............................. : Ok
Module 0039........................................................... : Ok
Module 003A........................................................... : Ok
Module 003D........................................................... : Ok
Module 003E........................................................... : Ok
Module 003F........................................................... : Ok
Module 0040........................................................... : Ok
Module 0041........................................................... : Ok
Module 0042........................................................... : Ok
Module 0043........................................................... : Ok
Module 004B........................................................... : Ok
Module 004F........................................................... : Ok
Modules reading process completed

Reading HDD ID pages list...
Reading HDD ID pages...
ID Page 00............................................................ : Ok
ID Page 01............................................................ : Ok
ID Page 02............................................................ : Ok
ID Page 03............................................................ : Ok
ID Page 04............................................................ : Ok
ID Page 08............................................................ : Ok
ID Page 09............................................................ : Ok
ID Page 0A............................................................ : Ok
ID Page 0B............................................................ : Ok
ID Page 0C............................................................ : Ok
ID Page 0D............................................................ : Ok
ID Page 0E............................................................ : Ok
ID Page 0F............................................................ : Ok

Reading System Files to profile folder
Folder: C:\Program Files\ACE Lab\PC-3000\Bin\!Profiles\SgF3\Grenada\ST2000DM001-1E6164-CC45-Z1E2XB2L\Data\SABackup\SysFiles\
Copies : 0 1

Sys File FC00A000(0).................................................. : Ok
Sys File FC00A000(1).................................................. : Ok
Sys File FC00D203(0).................................................. : Ok
Sys File FC00D203(1).................................................. : Ok
Sys File FC00E20D(0).................................................. : Ok
Sys File FC00E20D(1).................................................. : Ok
Sys File FC00F20E(0).................................................. : Ok
Sys File FC00F20E(1).................................................. : Ok
Sys File FC00B32C(0).................................................. : Ok
Sys File FC00B32C(1).................................................. : Ok
Sys File FC00C32D(0).................................................. : Ok
Sys File FC00C32D(1).................................................. : Ok
Sys File FC35101B(0).................................................. : Ok
Sys File FC35101B(1).................................................. : Ok
[b]Sys File FC358028(0).................................................. : Error
Error : Rd SysF 3:28:0 (0/8000) err = 0x0000000E[/b]
Sys File FC358028(1).................................................. : Ok
Sys File FC35A035(0).................................................. : Ok
Sys File FC35A035(1).................................................. : Ok
Sys File FC360100(0).................................................. : Ok
Sys File FC360100(1).................................................. : Ok
Sys File FC361101(0).................................................. : Ok
Sys File FC361101(1).................................................. : Ok
Sys File FC362102(0).................................................. : Ok
Sys File FC362102(1).................................................. : Ok
Sys File FC363103(0).................................................. : Ok
Sys File FC363103(1).................................................. : Ok
Sys File FC364104(0).................................................. : Ok
Sys File FC364104(1).................................................. : Ok
Sys File FC365105(0).................................................. : Ok
Sys File FC365105(1).................................................. : Ok
Sys File FC366106(0).................................................. : Ok
Sys File FC366106(1).................................................. : Ok
Sys File FC367107(0).................................................. : Ok
Sys File FC367107(1).................................................. : Ok
Sys File FC368108(0).................................................. : Ok
Sys File FC368108(1).................................................. : Ok
Sys File FC369109(0).................................................. : Ok
Sys File FC369109(1).................................................. : Ok
Sys File FC36A10A(0).................................................. : Ok
Sys File FC36A10A(1).................................................. : Ok
Sys File FC36B10B(0).................................................. : Ok
Sys File FC36B10B(1).................................................. : Ok
Sys File FC36C10C(0).................................................. : Ok
Sys File FC36C10C(1).................................................. : Ok
Sys File FC36D10D(0).................................................. : Ok
Sys File FC36D10D(1).................................................. : Ok
Sys File FC36E110(0).................................................. : Ok
Sys File FC36E110(1).................................................. : Ok
System Files reading process completed

Reading loader data to folder (LDR)
Scanning LOD files...
reading file FC00E20D...
Parsing container segment....... CFW Overlay
Segment: CUSTFW
Parsing segment....... CUSTFW
Warning! Segment whole-space check sum is not zero: 00005D4F
End parsing segment... CUSTFW
End parsing container segment... CFW Overlay
Appending: Disk FW / CFW Overlay
reading file FC360100...
Appending: Overlay ID = 00
reading file FC361101...
Appending: Overlay ID = 01
reading file FC362102...
reading file FC363103...
Appending: Overlay ID = 04
reading file FC364104...
Appending: Overlay ID = 05
reading file FC365105...
reading file FC366106...
reading file FC367107...
reading file FC368108...
reading file FC369109...
reading file FC36A10A...
reading file FC36B10B...
reading file FC36C10C...
reading file FC36D10D...

Backup of service information completed

my problem is drive is too slow.when i tried head by head copy it gives too many errs.
so pls somebody help me.now a days i have recived another 1000gb with same errs
thanks in advance

Dear SachinRaja
Can you have found any solution?
I have same hdd which have error

"Reading DT to profile folder
Folder: C:\Program Files\ACE Lab\PC-3000\Bin\!Profiles\SgF3\Grenada\ST2000DM001-1E6164-CC45-Z1E2XB2L\Data\SABackup\CPDir\

DT 0000 (Flash ROM), Read Adaptive Parameters File (RAP).............. : Error
Error : Rq Rd DT part ID 0, Offs 0x0 err! Tech state 0x72, 0x05260207
DT 0001 (Flash ROM), Controller Adaptive Parameters File (CAP)........ : Ok
DT 0004 (Flash ROM), Servo Adaptive Parameter File (SAP).............. : Error"

The Hdd remains very very slow. after few sector reading it gives snoooooz retry every time

Thanks,

hello all ,
I have post this post since very long 42 people has view this post but nobody is interested to comment.I dont know why ? Pls this is my request pls help me if somebody face this problemAtleast he can share his experience what they do and what happened.PLs.In most cases i have seen AJ2008 helped all.so again my personal request to him and also to administrator pls look at this post and comment

Hi,

I have not been at the forums for some time, lately is a very busy time for me!

For your case, SA reads well and all seems good, but errors you see relate to RAP CAP SAP, all are adaptive parameters for heads reading. Maybe this is problem, but I dont see a case like this before.

Did you check under 'HDD ID EDIT', probably some pending parameters are enabled that you should disable. Another common problem in Grenada is system file 17A, but usually in cases with damage to 17A symptoms are different and SA modules cant load.

If you still have this case, and are still working on it, try to remove pending options from ID EDIT, if this does not work you can PM me and we can try to find some solution on it

hi aj2008,
As this case is pending too.Pls help me if you can.pls add me in your skype or give me yr skype id .my is :datasolution1998
thanks for reply.

is the case resolved?

NO DEAR STILL PENDING.I AM COPYING DATA SLOWLY-SLOWLY.DEAR SIR AJ2008 PLS HELP AS YOU WROTE IN YOUR REPLY.I AM STILL WAITING SIR.THANKS AGAIN.

datasolution wrote:hi aj2008,
As this case is pending too.Pls help me if you can.pls add me in your skype or give me yr skype id .my is :datasolution1998
thanks for reply.

I will add you at skype now