dear guru
i have a hdd in the following specification :
SEAGATE ST31000520AS Barracuda LP
capacity : 1TB
firmware : CC32
when i connect it to pc3000 udma , it remains busy , heads sound is ok .
try Solution for problem "HDD Look (LED: 000000CC)" Result: unsuccessfully
lots of appreciation for all your help in advance
ST31000520AS IS BSY
Moderator: Nick_TS
-
hamidsamet
- Newbie
- Posts: 7
- Joined: 05.02.12
- Reputation: 0 / (2)
ST31000520AS IS BSY
Last edited by hamidsamet on 24.09.12, 12:37, edited 1 time in total.
Best Wishes
H.Samet
H.Samet
Re: ST31000520AS IS BSY
Please connect terminal adapter and see the terminal output.
Then try pressing ctrl-z and see if F3 T> output appear there.
Most likely this drive has one common problem we unfortunately haven't got any solution.
Then try pressing ctrl-z and see if F3 T> output appear there.
Most likely this drive has one common problem we unfortunately haven't got any solution.
With best regards
ACE Lab technical support
ts.acelab.eu.com
blog.acelab.eu.com
ACE Lab technical support
ts.acelab.eu.com
blog.acelab.eu.com
-
hamidsamet
- Newbie
- Posts: 7
- Joined: 05.02.12
- Reputation: 0 / (2)
Re: ST31000520AS IS BSY
dear Roustam
this solution does not answer
terminal adapter output DOES NOT SHOW ANYTHING THERE
the stage CTRL-Z does not work
best wishes
this solution does not answer
terminal adapter output DOES NOT SHOW ANYTHING THERE
the stage CTRL-Z does not work
best wishes
Best Wishes
H.Samet
H.Samet
Who is online
Users browsing this forum: No registered users and 15 guests