PC-3000 Forum

I have 2 Seagate ST380811AS if I connect both hard drive to pc3k it is not detected and just spinning, in terminal output it displays...

1st hdd

Interface task reset
4096k x 16 SDRAM
TONKA2 - 1_Disk M-31 03-22-06 10:53

Buzz - Head Mask FFFF - Switch to full int.
Spin Ready
(P)SATA Reset
DiskAccess ReadSector EC=43 at ffffffff.00.0002
DiskAccess ReadSector EC=43 at ffffffff.00.0002

12
Initializing SMART SectorsDiskAccess ReadSector EC=43 at ffffffff.00.0001

Read Ver Retrys
DiskAccess ReadSector EC=43 at ffffffff.00.0001

Read Ver Retrys
DiskAccess ReadSector EC=43 at ffffffff.00.0001

Read Ver Retrys
DiskAccess ReadSector EC=43 at ffffffff.00.0001

Read Ver Retrys
DiskAccess ReadSector EC=43 at ffffffff.00.0001

Read Ver Failure!
DiskAccess ReadSector EC=43 at ffffffff.00.022b
Failed sys sect. write! Nwt Er 00 RdWr 15904.00.022b
DiskAccess ReadSector EC=43 at ffffffff.00.0002
DiskAccess ReadSector EC=43 at ffffffff.00.0002
DiskAccess ReadSector EC=43 at ffffffff.00.006d
DiskAccess ReadSector EC=43 at ffffffff.00.0080
DiskAccess ReadSector EC=43 at ffffffff.00.0080
Unable To Load Overlay 01|000A

T>

**********************************
2nd hdd

T>
T>Interface task reset
4096k x 16 SDRAM
TONKA2 - 1_Disk M-31 03-22-06 10:53
Head Mask FFFF - Switch to full int.
Spin Ready
(P)SATA Reset
DiskAccess ReadSector EC=43 at ffffffff.00.0002
Unable To Load Overlay 01|000A

T>

Do you think it is damaged head? Can someone gave some advice to solve this error? Thanks.

for case #2 in terminal Ctrl-R or r (case sensitive) and post the output here
for case #1 needs some more info.