PC-3000 Forum

no clicking, no bios detection

following is o/p

F3 T>
ASCII Diag mode

F3 T>i4,1,22

ExecuteSpinRequest
HighPowerMode 0002
F3 T>/1

F3 1>N1

Init SMART Fail
LED:000000CC FAddr:0024ECD
Rst 0x08M
Rst 0x08M


Any idea?

Service Area is physically damaged. I think that there is no hope to recover data. But you may try by changing the heads.

thanks Issam for ur reply, but no donor drive at present for replacing head

niteshgorasia wrote:F3 T>i4,1,22

ExecuteSpinRequest
HighPowerMode 0002

At this point spindle has already stopped. I suspect SA is good but inaccessible because heads are bad.