ST9500325AS shows 0 MB

[alphapune]

Model : ST9500325AS
Serial : 5VE6Z3RD
Firmware : 0002
Capacity : MB ()

Tried Seagate utility of 0 MB did not worked.
Tried replacing PCB but same issue.
Even only PCB connected then also shows 0MB.
SPin Down After some time and gets ready State.


Rst 0x08M
RW cmd 002F req = 18 F0 9F E5 18 F0 9F E5 18 F0 9F E5 18 F0 9F E5 18 F0 9F E5 00 00 A0 E1
opts = 00000000

RW Err = 84150180

LED:000000CC FAddr:00259965
LED:000000CC FAddr:00259965

Any suggestions

[rezafarah]

see this page:
http://acelaboratory.ru/forum/viewtopic.php?f=34&t=8416&p=29244&sid=d3ab696886f83cd9fd6e92abcaaff08d&sid=d3ab696886f83cd9fd6e92abcaaff08d#p29244
the seconed item is a video about "Solution of service area problem by loader".
try it.