segate 500

[sepid]

hello all
what is it massege?
Rst 0x10M
ASCII Diag mode

F3 T>/2

F3 2>Z

Spin Down Complete
Elapsed Time 0.135 msecs
F3 2>U

DiagError 00006008
Spin Error
Elapsed Time 19.935 secs
R/W Status 2 R/W Error 84150180
F3 2>
------------------------------------------
any command that I type then, I loose the access to the console and I get the message:

LED:000000CC FAddr:00279573
LED:000000CC FAddr:00279573


For the Logs, the drive is never ready and when I try to edit HDD ID, or any other function, I get:

----------------------------------------------------------
Test : Edit HDD ID
Drive not ready
Rd Sys File: vol = 0, FID = 093, Copy = 000...
Root Sys File Rd Err!
----------------------------------------------------------

when I click on utility status to see the FW, num head...

----------------------------------------------------------
Requesting FW Pkg ver ........
Error requesting FW Pkg ver!

Detecting Phys Sct Size...
Result.................................. : Error
Error obtaining Phys Sect Size!
Drive not ready
Detecting Max Head number...
Phys. heads............................. : Error
Drive not ready
Drive not ready
Detecting Max Head number...
Phys. heads............................. : Error
Drive not ready

[AJ2008]

hello all
what is it massege?
Rst 0x10M
ASCII Diag mode

F3 T>/2

F3 2>Z

Spin Down Complete
Elapsed Time 0.135 msecs
F3 2>U

You reach T> after short / isolate or it reaches it by itself? Is it 7200.12 series?

[sepid]

hello
yes it is 7200.12