ST9250410AS 7200.4, regen translator - now errs.

[drdoc]

Have a

Model : ST9250410AS
Serial : 5VG9ETTN
Firmware : D005SDM1
Capacity : 232.89 GB (488 397 168)

Could read the start upto to 100M but couldnt read end of drive.
So I did regenterate translator.
No I cant even read sector 0

The recover translator process starts and then the screen becomes a blur
of red error messages...

What now?

Thanks


Test : Recover translator
First start
Translation "forks" list file..................... : E:\Program Files\ACE Lab\PC-3000\Bin\!Profiles\SgF3\F3 Arch (common)\ST9250410AS-D005SDM1-5VG9ETTN\Defects\TranslationForks.lba
Maximal defect chain length....................... : 64
Take into account P-List.......................... : Yes


HDD resources backup
Folder: E:\Program Files\ACE Lab\PC-3000\Bin\!Profiles\SgF3\F3 Arch (common)\ST9250410AS-D005SDM1-5VG9ETTN\Data\SABackup\


Backup of service information completed

Switching Autoreassign OFF...
Obtaining Saved Mode Pages File information...
Reading Saved Mode Pages...
Parsing Saved Mode Pages...
SMP Dbl: 0x3C000317 - 0x037FF7FF (0x0000000F)
Writing Saved Mode Pages...
HDD power supply switching OFF/ON...

G-List erase...

Regenerate translator
Result............................................ : Ok

HDD ID reading...
Detecting defects hiding cmd type...
G-List erase...
Detecting Phys Sct Size...
Result.................................. : 512

Start scanning...
"Fork" searching: 0 - 488397167
HDD power supply switching OFF/ON...
Verification error 48-bit (ABR)
Surface scanning error : Verification error 48-bit (ABR)
LBA : 0
"Fork" searching: 1 - 488397167
Verification error 48-bit (ABR)
Surface scanning error : Verification error 48-bit (ABR)
LBA : 1
"Fork" searching: 2 - 488397167
Verification error 48-bit (ABR)
Surface scanning error : Verification error 48-bit (ABR)
LBA : 2
"Fork" searching: 3 - 488397167
Verification error 48-bit (ABR)
Surface scanning error : Verification error 48-bit (ABR)
LBA : 3
"Fork" searching: 4 - 488397167
Verification error 48-bit (ABR)

[ACE_Admin]

Try to use the method described here : viewtopic.php?f=34&t=7316