ST3500620AS Barracuda 7200.11

[misa]

Hello Bruno,

Need to use shortcut on PCBA

Misa

[misa]

Hello Bruno,

Need to use shortcut on PCBA

Misa

[steven]

try shourtcut from PCB my friend.
You need to try several time. this series is rather sencitive.

[dobrevjetser]

I had allready several times a combination of the two errors.
First i solve the LED error in the usual way with pc3k; then the drive is recognized but with size 0; then i apply the terminal command m0,2,2,0,0,0,0,22 and till now i could solve all my cases like this.

Best regards,

Dobre

[steven]

Good