ST3320820A DiskAccess ReadSector EC=47

[manel]

Hi all,

Seagate ST3320820A P/N: 9BJ03G-065 Firm: 3.AAD site code: TK

When starts PC3000 only switch in green BSY and DSC. DRD it's not light. Here's the log...

I supose that will be a heat problem that could not read something... but when I do a Head Test:
/2
s444,0,22
U
H0,H1 etc it's working fine...

Any Ideas please???

Reset
4096k x 16 DRAM
GALAXY2D - 1_Disk S-6A 05-31-06 14:18
Head Mask FFFF - Switch to full int.
Spin Ready
(P)PATA Reset
$Switch to full int.
AM Reacquired
$$$Switch to full int.
AM Reacquired
DiskAccess ReadSector EC=43 at ffffffff.00.0002

Read Ver Retrys
DiskAccess ReadSector EC=43 at ffffffff.00.0002

Read Ver Retrys
DiskAccess ReadSector EC=43 at ffffffff.00.0002

Read Ver Retrys
DiskAccess ReadSector EC=43 at ffffffff.00.0002

Read Ver Retrys
DiskAccess ReadSector EC=47 at ffffffff.00.0080
DiskAccess ReadSector EC=47 at ffffffff.00.0080
Unable To Load Overlay 01|000A

T>


Two errors shown. DATA ECC ERROR and Missed Data sync Byte.


Thx in advance.

[AJ2008]

I am not very experienced with seagate terminal, but in my experience when I have error codes such as EC=43 and EC=47, usually heads need to be replaced.

Maybe someone can give some clarity on this?

[manel]

this is what I thought, but I need to confirm