PC-3000 Forum

Dear All,
I have a seagate 7200.7 ST380011A Drive. When i connect it to the usb terminal, the terminal replies with
Detection of HDD COM port baud rate..... : Error
Terminal : reply timeout error
Terminal is constantly repeating the message below:
OLS-f9e4f8,Exit OLS- 1233842
OLS-1233842,Exit OLS- 0
OLS-0,(37),AT Er 00 Nwt Er 37 RdWr 009c.00.0000
00,0000/0/00,00,00,000,|
Niwot: 006db2a1 ff 00002784.0.000 0001 0002 3f62 0002
Resume-1,(37),AT Er 00 Nwt Er 37 RdWr 009c.00.003f
00,0000/0/00,00,00,000,|
Niwot: 006db2a1 ff 00002784.0.000 0001 0002 3f62 0002
Resume-40,(37),AT Er 00 Nwt Er 37 RdWr 009c.00.0050
00,0000/0/00,00,00,000,|
Niwot: 006db2a1 ff 00002784.0.000 0001 0002 3f62 0002
Resume-51,(37),AT Er 00 Nwt Er 37 RdWr 009c.00.0051
00,0000/0/00,00,00,000,|
Niwot: 006db2a1 ff 00002784.0.000 0001 0002 3f62 0002
Resume-52,(37),AT Er 00 Nwt Er 37 RdWr 009c.00.0053
00,0000/0/00,00,00,000,|
Niwot: 006db2a1 ff 00002784.0.000 0001 0002 3f62 0002
Resume-54,(37),AT Er 00 Nwt Er 37 RdWr 009c.00.0054
00,0000/0/00,00,00,000,|
Niwot: 006db2a1 ff 00002784.0.000 0001 0002 3f62 0002
Resume-55,(37),AT Er 00 Nwt Er 37 RdWr 009c.00.0055
00,0000/0/00,00,00,000,|
Niwot: 006db2a1 ff 00002784.0.000 0001 0002 3f62 0002
Resume-56,(37),AT Er 00 Nwt Er 37 RdWr 009c.00.0056
00,0000/0/00,00,00,000,|
Niwot: 006db2a1 ff 00002784.0.000 0001 0002 3f62 0002
Resume-57,(37),AT Er 00 Nwt Er 37 RdWr 009c.00.0058
00,0000/0/00,00,00,000,|
Niwot: 006db2a1 ff 00002784.0.000 0001 0002 3f62 0002

Further its dont enter the terminal F-level when start in safe mode and i cannot use the terminal command.
can anyone advice what to do?
Thanks
Dollart

Have you tried to replace USB cable?

I had problems once and turned out to be USB cable.