WD Elements 6TB Encryption
Posted: 20.04.24, 09:18
Hello Experts,
* I have a WD Elements 6TB External Hdd. 3.5" Hdd
* WDC WD60EDAZ-11U78B0-04-A8H-2-WD-WX12DA1PZZZP
* Family Venicer
* Sata Pcb 2060-810011-001 Rev P1 & Usb 3.0 PCB 4061-705094-004
* Spindle Runs & Clicks Then Restart the Drive.Actually Hdd Not Detect Status.
* Now ,Following Steps are i Have Done
* Rom SED Lock Unlocked & SA Fully Copied & SA Realy Fine No Issue
* LDR Upload in ram then Hdd Detect With Full ID
* But sectors are read only in Utility Mode. So i Upload translator Module Then Sectors are Read.
* But Now All Sectors Are Encrypted, I Have Set Decrypt option in DE,Then Still Sectors are Encrypted.
* I Tried with Original Sata Pcb Also.
Here any Experts face this issue Earlier pls Guide Me.
Thanks In Advance.
* I have a WD Elements 6TB External Hdd. 3.5" Hdd
* WDC WD60EDAZ-11U78B0-04-A8H-2-WD-WX12DA1PZZZP
* Family Venicer
* Sata Pcb 2060-810011-001 Rev P1 & Usb 3.0 PCB 4061-705094-004
* Spindle Runs & Clicks Then Restart the Drive.Actually Hdd Not Detect Status.
* Now ,Following Steps are i Have Done
* Rom SED Lock Unlocked & SA Fully Copied & SA Realy Fine No Issue
* LDR Upload in ram then Hdd Detect With Full ID
* But sectors are read only in Utility Mode. So i Upload translator Module Then Sectors are Read.
* But Now All Sectors Are Encrypted, I Have Set Decrypt option in DE,Then Still Sectors are Encrypted.
* I Tried with Original Sata Pcb Also.
Here any Experts face this issue Earlier pls Guide Me.
Thanks In Advance.