No connection

Questions about different pinouts, scheme of soldering and required equipment

Moderators: Nick_TS, Roman_TS, Filipp_TS


zoratra
Newbie
Posts: 3
Joined: 17.09.24
Reputation: 0 / (0)

No connection

Postby zoratra » 18.09.24, 08:43

I have a microsd Card Type 1
I soldered it on the circuit board as done on the description.

But I am not possible to read the chip ID correctly.

Is there a solution for this problem?

Best regards
Attachments
PXL_20240918_061339730.jpg
PXL_20240918_061339730.jpg (2.96 MiB) Viewed 1701 times
PXL_20240918_061308763.jpg
PXL_20240918_061308763.jpg (2.26 MiB) Viewed 1701 times
PXL_20240918_061300822.jpg
PXL_20240918_061300822.jpg (1.96 MiB) Viewed 1701 times

User avatar
SGdata
New user
Posts: 99
Joined: 24.11.16
Reputation: 3 / (32)

Re: No connection

Postby SGdata » 18.09.24, 16:02

Most probably soldering is bad and you have some shortage. Check it with multimeter.


Return to “Monolithic devices recovery”

Who is online

Users browsing this forum: No registered users and 1 guest