Logic analyzer usage

Questions about different pinouts, scheme of soldering and required equipment

Moderators: Nick_TS, Roman_TS, Filipp_TS

Posts: 3
Joined: 15.03.22
Reputation: 0 / (0)

Logic analyzer usage

Postby jand_krmnl » 08.12.23, 07:29

Hello, I need to use Logic analyzer to identify the pinouts of my microSD, but i never work before on logic analyzer. I have dslogic. To find out, I wanted to test it on a 3*7 SD card whose pinout I know. My settings are as follows.

Logic analyzer mode - buffer
Sampling rate / frequency 100Mhz
Threshold: 1.6V for VccQ = 3.3V;
Sampling time - 100 milliseconds

Since my pc3000 adapter was not complete, I connected the logic analyzer to Rusolut. I power the SD card or read the ID using Rusolut. However, I noticed that I also see signals on pins that I have not connected. :shockable: Where am I making a mistake? Also, how else can I send the read id command? Is this the correct path I follow? Thank you everyone. :wave:

Return to “Monolithic devices recovery”

Who is online

Users browsing this forum: No registered users and 1 guest