Hello, we received a USB pendrive with no markings at all.
The controller is SM3281L and I know is supported.
The 2 memory chips however don't have any markings on them, they should be of 128GB each.
When I tried to read them the ID are 0x89C40C22-AA000000 and 0x0x89D40C32-AA000000.
Are these supported?
Thank you.
are Chip IDs 89C40C22 and 89D40C32 supported?
Moderators: Nick_TS, Roman_TS, Filipp_TS
-
MicheleVitiello
- Newbie
- Posts: 7
- Joined: 20.10.16
- Reputation: 0 / (3)
are Chip IDs 89C40C22 and 89D40C32 supported?
- Attachments
-
- IMG_20210723_102539_low.jpg (6.79 KiB) Viewed 1519 times
-
- IMG_20210723_102514_low.jpg (6.41 KiB) Viewed 1519 times
-
- Chip ID_2.JPG (7.03 KiB) Viewed 1519 times
-
- Chip ID.JPG (6.68 KiB) Viewed 1519 times
Re: are Chip IDs 89C40C22 and 89D40C32 supported?
Hello.
0x89D40C32-AA000000 - it's a QLC chip and it is already in PC-3000 Flash database and fully supported. We even have a ReadRetry for it. Usually, we can get not bad recovery result for this NAND ID.
As for 0x89C40C22-AA000000 - looks strange. Not sure that ID is correct, but theoretically we can add it in support list. You need to make a ticket and prepare the latest software version of PC-3000 Flash (7.5.14)
0x89D40C32-AA000000 - it's a QLC chip and it is already in PC-3000 Flash database and fully supported. We even have a ReadRetry for it. Usually, we can get not bad recovery result for this NAND ID.
As for 0x89C40C22-AA000000 - looks strange. Not sure that ID is correct, but theoretically we can add it in support list. You need to make a ticket and prepare the latest software version of PC-3000 Flash (7.5.14)
With best regards
ACELab Technical Support
ts.acelab.eu.com
blog.acelab.eu.com
ACELab Technical Support
ts.acelab.eu.com
blog.acelab.eu.com
Return to “For beginners (Flash)”
Who is online
Users browsing this forum: No registered users and 1 guest