PC 3000 flash pinouts

[Rserrano]

so im tryng to recover from a sd card and a micro sd under the pinout scheme on both of these items I come across a pin WP what is this .. WE VCC i can find but WP i cannot any ideas ? any help would be greatly appreciated ! So Many questions lololol

[d_d_recovery]

WP is Write Protect. You don't need it for a pinout recovery.

[Rserrano]

WP wright protect no connection needed ggot it thanks now what about( BUT )http://www.pc3000flash.com/solbase/monochip.php?iid=21&lang=eng this is what im going by

[Roman_TS]

Hope that your card is not Samsung EVO

[Rserrano]

no its not mr roman! lol im working on 2 cards right now practice chips one is a micro sd card on hold right now but the one im working on is a sandisk ultra plus. 32 gb now i soldered it to the board looked under the micro scope and this is what i found.
S732G1621
TWLN002994792
the program reads Chip I.D. 983A98A3 it reads the chip but i cant figure out the controller name. any ideas ?? I did a great job I think, soldering it to the board being I see chip I.D. and it reads data from both chips (sandwiched) I read that from the manual lololol (roman)