Samsung 850 EVO - 250

[Nadpc3k]

HI :

I have this SSD .. show ID and size but i can not read the data .. any solution for this ... i Do not see anything in PC3k SSD application .. please let me know if there is any thing i can access the data

[Roman_TS]

Hello. Samsung 850 EVO will appear in support list in 2017. Now it's not supported.

[Amarbir[CDR-Labs]]

Source of the post Hello. Samsung 850 EVO will appear in support list in 2017. Now it's not supported.

Hi ,
When do You Anticipate The New Version Comming Mr Roman

[Roman_TS]

New version will be near the Spring 2017. Unfortunately I don't know too much about future version of PC-3000, and I can't say will it contain 850 EVO in support list, or not. Samsung 850 EVO has a problem with encrypted terminal, so we can't upload LDR in it. But we are working on this problem, so I hope that during 2017 it will appear finally.

[avalanche]

Any update on Samsung EVO 850 / PM871 support for the S4LN062X01-Y030 processor?

I have one in at the moment, to RDY, then BSY on any command. Lots of NAND errors no doubt. I'll be renewing my support contract with any update you release as it ran out a couple of months back

J

[Roman_TS]

Looks like 850 EVO will not appear in nearest future. Like all other families (650, 750, 951) new Samsung FW contain digital sign, which should be bypassed before it become possible to get the data. Now we can say that it's almost impossible, at least without serious modification of LDR. All our forces are dropped on Phison-based SSD, and they will be ready in nearest update. Then - we will seem, maybe somewhere in the end of 2017, new Samsung models will appear too.

[Ohtic]

Source of the post Looks like 850 EVO will not appear in nearest future. Like all other families (650, 750, 951) new Samsung FW contain digital sign, which should be bypassed before it become possible to get the data. Now we can say that it's almost impossible, at least without serious modification of LDR. All our forces are dropped on Phison-based SSD, and they will be ready in nearest update. Then - we will seem, maybe somewhere in the end of 2017, new Samsung models will appear too.

Any news if the 850 EVO will be supported soon?

[Roman_TS]

Source of the post Any news if the 850 EVO will be supported soon?

Hello. Still now any news about future support of Samsung 850 EVO. Maybe one day, but not in first half of 2018.

[rajax69]

Hello Roman,

I have here Samsung PM871 controller S4LN062X01-Y030 , full ID 256GB but reports ABR error " Enable smart command sending error Device error detected ABR " . I couldn't read any sector. Is there a fix for it ?

Thank you !

[Roman_TS]

[quote="rajax69"]Source of the post Hello Roman/quote]

Hello. PM871 = 850 EVO but for OEM manufacturers. Problem remain the same - it's not supported.

[rajax69]

Okay!

Thank you Roman

[jerema]

Hello,

I got an 850 EVO 1TB with S4LN045X01-8030.

Is there in the future a solution in progress ?

Thanks