Samsung 840 - MZ-7TD250

Moderators: Roman_TS, Filipp_TS, Sergey_TS


Ohtic
Newbie
Posts: 10
Joined: 07.11.16
Reputation: 0 / (2)

Samsung 840 - MZ-7TD250

Postby Ohtic » 07.12.18, 05:07

This is a 250GB Samsung 840
Stays Busy when powered on.
attempting to access safe mode to upload loader fails.
busy light fades and does not get RDR/DSC and returns with "Safe Mode : Error"
As you can see from the photos I am shorting the correct points.
Is there somthing im missing?
pic from pc3k.jpg
pic from pc3k.jpg (9.65 KiB) Viewed 7156 times
20181207_155525.jpg
20181207_155525.jpg (11.4 KiB) Viewed 7156 times
pic from pc3k 2.jpg
pic from pc3k 2.jpg (9.23 KiB) Viewed 7156 times

User avatar
Roman_TS
Site Admin
Posts: 676
Joined: 09.02.11
Reputation: 25 / (248)

Re: Samsung 840 - MZ-7TD250

Postby Roman_TS » 11.12.18, 11:13

Hello. Sometimes pins for shorting might become covered with layer of oxide. My recommendation - use rubber for cleaning this contacts. Then - use tweezers for shorting. Should works.
With best regards
ACELab Technical Support
ts.acelab.eu.com
blog.acelab.eu.com


Return to “840 Series”

Who is online

Users browsing this forum: No registered users and 1 guest