Page 1 of 1
Mz-Hpv5120 not power on death
Posted: 18.07.16, 08:22
by redlabs
Dear Friends ,
Can i get solution for this ssd drive not power ON ,How to check this ?
Attachments
- P_20160717_164151.jpg (5.8 KiB) Viewed 183189 times
Re: Mz-Hpv5120 not power on death
Posted: 18.07.16, 19:27
by DataMedics
A picture of the actual control chip would be a good start. Also what equipment do you have, PC-3000 flash, SSD edition?
Re: Mz-Hpv5120 not power on death
Posted: 19.07.16, 08:45
by redlabs
If i purchase SSD edition ,Recovery is possible for this ?
Re: Mz-Hpv5120 not power on death Topic is solved
Posted: 19.07.16, 11:04
by Roman_TS
Hello! This is
PM951 family SSD - in case if current SSD has a problem with Firmware, then - noway. It's rather new and not in support list.
Supported family list you can find here:
http://blog.acelab.eu.com/list
Re: Mz-Hpv5120 not power on death
Posted: 02.08.16, 11:41
by redlabs
Roman_TS wrote:Source of the post Hello! This is
PM951 family SSD - in case if current SSD has a problem with Firmware, then - noway. It's rather new and not in support list.
Supported family list you can find here:
http://blog.acelab.eu.com/list
Please which adapter is best for SSD ? R u selling SSD adapter
Re: Mz-Hpv5120 not power on death
Posted: 04.08.16, 01:06
by Roman_TS
Yes, we are going to start selling the SSD adapters. Please contact with our sales department, thanks!
http://www.acelab.eu.com/order.php
Re: Mz-Hpv5120 not power on death
Posted: 09.08.16, 08:18
by redlabs
Thank you ...Roman
I didnt get any reply ...Please do the needful