Exist support for PS3111 controller?

Moderators: Roman_TS, Filipp_TS, Sergey_TS


pauloanbraga
Newbie
Posts: 7
Joined: 15.06.13
Reputation: 0 / (1)

Exist support for PS3111 controller?

Postby pauloanbraga » 08.06.18, 18:38

I have one ssd 480GB KINGSTON SA400S37 and it stays in READY STATE and show ID:
PS3111
FW: SBRM02.0
20MB

Do you have any solution?

User avatar
Roman_TS
Site Admin
Posts: 724
Joined: 09.02.11
Reputation: 26 / (262)

Re: Exist support for PS3111 controller?

Postby Roman_TS » 13.06.18, 14:29

Hello,

PS3111 will appear in support list during next 4-6 weeks.
With best regards
ACELab Technical Support
ts.acelab.eu.com
blog.acelab.eu.com


mostafa1
Newbie
Posts: 4
Joined: 24.04.19
Reputation: 0 / (0)

Re: Exist support for PS3111 controller?

Postby mostafa1 » 22.08.20, 08:20

i have GIGABYTE SSD 1TB PS3111 FW.SBRM02.0
Read Capacity 20MB
can't get find this FW in ps3111
and it get bsy after start read chip info after upload any FW different

User avatar
Roman_TS
Site Admin
Posts: 724
Joined: 09.02.11
Reputation: 26 / (262)

Re: Exist support for PS3111 controller?

Postby Roman_TS » 22.08.20, 18:25

mostafa1 wrote:Source of the post i have GIGABYTE SSD 1TB PS3111 FW.SBRM02.0
Read Capacity 20MB
can't get find this FW in ps3111
and it get bsy after start read chip info after upload any FW different

Hello. You should short the drive in SAFE MODE and keep it shorted all the time. It's important. I recommend you to solder a short wire between pins.

Loader will be automatically highlighted in PC-3000 6.7x.

If you need a help - make a ticket in TS department, our engineers will guide you.
With best regards
ACELab Technical Support
ts.acelab.eu.com
blog.acelab.eu.com

User avatar
gameboybin
New user
Posts: 89
Joined: 09.09.20
Reputation: 0 / (0)

Re: Exist support for PS3111 controller?

Postby gameboybin » 16.08.24, 09:26

Have anyone found the solution for this???

User avatar
Roman_TS
Site Admin
Posts: 724
Joined: 09.02.11
Reputation: 26 / (262)

Re: Exist support for PS3111 controller?

Postby Roman_TS » 19.08.24, 12:23

PS3111-based drives are fully supported since 2018 :) New loaders appear with the every new software update, so we can support even the latest PS3111 modifications.
With best regards
ACELab Technical Support
ts.acelab.eu.com
blog.acelab.eu.com


Return to “Other SSD Kingston”

Who is online

Users browsing this forum: No registered users and 1 guest